|
K30P64M72SF1 Datasheet, PDF (34/68 Pages) Freescale Semiconductor, Inc – K30 Sub-Family | |||
|
◁ |
Peripheral operating requirements and behaviors
While different partitions of the FlexNVM are available, the intention is that a single
choice for the FlexNVM partition code and EEPROM data set size is used throughout the
entire lifetime of a given application. The EEPROM endurance equation and graph
shown below assume that only one configuration is ever used.
Writes_subsystem =
EEPROM â 2 Ã EEESPLIT Ã EEESIZE
EEESPLIT Ã EEESIZE
à Write_efficiency à nnvmcycd
where
⢠Writes_subsystem â minimum number of writes to each FlexRAM location for
subsystem (each subsystem can have different endurance)
⢠EEPROM â allocated FlexNVM for each EEPROM subsystem based on DEPART;
entered with Program Partition command
⢠EEESPLIT â FlexRAM split factor for subsystem; entered with the Program
Partition command
⢠EEESIZE â allocated FlexRAM based on DEPART; entered with Program Partition
command
⢠Write_efficiency â
⢠0.25 for 8-bit writes to FlexRAM
⢠0.50 for 16-bit or 32-bit writes to FlexRAM
⢠nnvmcycd â data flash cycling endurance
K30 Sub-Family Data Sheet, Rev. 2, 4/2012.
34
Freescale Semiconductor, Inc.
|
▷ |