English
Language : 

MC68HC908JL3 Datasheet, PDF (170/180 Pages) Freescale Semiconductor, Inc – Microcontrollers
B.7 Electrical Specifications
Electrical specifications for the MC68H(R)C908JL3E/JK3E apply to the MC68H(R)C08JL3E/JK3E,
except for the parameters indicated below.
B.7.1 DC Electrical Characteristics
Table B-2. DC Electrical Characteristics (5V)
Characteristic(1)
Symbol
Min
Typ(2)
Max
Unit
VDD supply current, fOP = 4MHz
Run(3)
MC68HC08JL3E/JK3E
MC68HRC08JL3E/JK3E
Wait(4)
MC68HC08JL3E/JK3E
MC68HRC08JL3E/JK3E
Stop(5)
(–40°C to 85°C)
MC68HC08JL3E/JK3E
MC68HRC08JL3E/JK3E
(–40°C to 125°C)
MC68HC08JL3E/JK3E
MC68HRC08JL3E/JK3E
—
9
11
mA
—
4.3
5
mA
—
5.5
6.5
mA
IDD
—
0.8
1.5
mA
—
1.8
5
μA
—
1.8
5
μA
—
5
10
μA
—
5
10
μA
Pullup resistors(6)
PTD6, PTD7
RST, IRQ, PTA0–PTA6
RPU1
1.8
4.3
4.8
kΩ
RPU2
16
31
36
kΩ
1. VDD = 4.5 to 5.5 Vdc, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted.
2. Typical values reflect average measurements at midpoint of voltage range, 25 °C only.
3. Run (operating) IDD measured using external square wave clock source (fOP = 4MHz). All inputs 0.2V from rail. No dc
loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly
affects run IDD. Measured with all modules enabled.
4. Wait IDD measured using external square wave clock source (fOP = 4MHz). All inputs 0.2V from rail. No dc loads. Less
than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly affects wait IDD.
5. Stop IDD measured with OSC1 grounded; no port pins sourcing current. LVI is disabled.
6. RPU1 and RPU2 are measured at VDD = 5.0V.
MC68HC908JL3E Family Data Sheet, Rev. 4
170
Freescale Semiconductor