MC9S08DN60_08 Datasheet, PDF (167/356 Pages) Freescale Semiconductor, Inc – Microcontrollers

Chapter 10
Analog-to-Digital Converter (S08ADC12V1)
10.1 Introduction
The 12-bit analog-to-digital converter (ADC) is a successive approximation ADC designed for operation
within an integrated microcontroller system-on-chip.
NOTE
MC9S08DN60 Series devices operate at a higher voltage range (2.7 V to
5.5 V) and do not include stop1 mode. Please ignore references to stop1.
10.1.1 Analog Power and Ground Signal Names
References to V_DDAD and V_SSAD in this chapter correspond to signals V_DDA and V_SSA, respectively.
10.1.2
Channel Assignments
NOTE
The ADC channel assignments for the MC9S08DN60 Series devices are
shown in Table 10-1. Reserved channels convert to an unknown value.
This chapter shows bits for all S08ADC12V1 channels. MC9S08DN60
Series MCUs do not use all of these channels. All bits corresponding to
channels that are not available on a device are reserved.
MC9S08DN60 Series Data Sheet, Rev 3
Freescale Semiconductor
167