XRT75R12 Datasheet, PDF (72/89 Pages) Exar Corporation – TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR

XRT75R12
REV. P1.0.2
PRELIMINARY
TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
BIT NUMBER
NAME
1
Change of LOS
Condition Interrupt
Status
0
Change of DMO
Condition Interrupt
Status
TYPE
DESCRIPTION
RUR
Change of Receive LOS (Loss of Signal) Defect Condition Inter-
rupt Status:
This RESET-upon-READ bit-field indicates whether or not the Change
of the Receive LOS Defect Condition Interrupt (for Channel n) has
occurred since the last read of this register.
0 - Indicates that the Change of the Receive LOS Defect Condition
Interrupt has NOT occurred since the last read of this register.
1 - Indicates that the Change of the Receive LOS Defect Condition
Interrupt has occurred since the last read of this register.
NOTE: The user can determine the current state of the Receive LOS
Defect condition by reading out the contents of Bit 1 (Receive
LOS Defect Declared) within the Alarm Status Register.(n)
RUR
Change of Transmit DMO (Drive Monitor Output) Condition Inter-
rupt Status - Ch n:
This RESET-upon-READ bit-field indicates whether or not the Change
of the Transmit DMO Condition Interrupt (for Channel n) has occurred
since the last read of this register.
0 - Indicates that the Change of the Transmit DMO Condition Interrupt
has NOT occurred since the last read of this register.
1 - Indicates that the Change of the Transmit DMO Condition Interrupt
has occurred since the last read of this register.
NOTE: The user can determine the current state of the Transmit DMO
Condition by reading out the contents of Bit 0 (Transmit DMO
Condition) within the Alarm Status Register.(n)
69