XRD98L61 Datasheet, PDF (12/37 Pages) Exar Corporation – CCD Image Digitizers with CDS, PGA and 12-Bit A/D

XRD98L61
Preliminary
Calibration
Default
D9
Avg[2]
1
D8
Avg[1]
0
D7
Avg[0]
1
D6
Mode
0
D5
D4
D3
D2
LFrame DNS[1] DNS[0] FastCal
0
1
1
1
D1
Hold
0
D0
ManCal
0
Calibration Register (Reg. 2,Address 000010)
The Calibration register is used to set various options for the Black Level Offset Calibration.
Avg[2:0] set the number of OB pixels to average:
000 = 4 pixels,
100 = 64 pixels,
001 = 8 pixels,
101 = 128 pixels,
010 = 16 pixels,
110 = 256 pixels,
011 = 32 pixels,
111 = 512 pixels.
Mode=0, selects Line mode calibration (use OB pixels at start or end of each line).
Mode=1, do not use.
LFrame=0, selects Line mode calibration.
LFrame=1, do not use.
DNS[1:0] selects the Digital Noise Suppression filter setting:
00 = off,
10 = medium,
01 = narrow,
11 = wide.
FastCal=1, enables an option to speedup convergence of the calibration feedback loop.
Hold=1, stops all updates to the Coarse and Fine offset DAC accumulators.
ManCal=1, enables manual calibration. The offset DACs are set to the values in the CDAC and FDAC
registers.
See the Black Level Offset Calibration section for more information.
WaitA
Default
D9
WL[11]
0
D8
WL[10]
0
D7
D6
WL[9] WL[8]
0
0
WaitA Register (Reg. 3, Address 000011)
D5
WL[7]
0
D4
WL[6]
0
D3
WL[5]
0
D2
WL[4]
0
D1
WL[3]
0
D0
WL[2]
0
WaitB
Default
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
WL[1] WL[0]
0
0
0
0
0
0
0
0
0
1
WaitB Register (Reg. 4, Address 000100)
The WaitA and WaitB registers are concatenated to make up the Wait register.
See OB Pixel calibration section for more information.
OB Lines
Default
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
OBL[7] OBL[6] OBL[5] OBL[4] OBL[3] OBL[2] OBL[1] OBL[0]
0
0
0
0
0
0
0
0
1
0
OB Lines Register (Reg. 5, Address 000101)
The OB Lines register is used by the Offset Calibration Logic to set the number of Optical Black lines used
for Calibration in the Frame Mode. Do not use.
Rev. P4.00
12