ISD-200 Datasheet, PDF (8/64 Pages) List of Unclassifed Manufacturers – USB Mass Storage Class Bulk-Only Specification Compliant

ISD-200 ASIC Datasheet
Document Revision History
Title
Company
Initial Revision #
Creation Date/Time
ISD-200 ASIC Datasheet
In-System Design Inc. Boise, ID.
1.0
March 13, 2000
Revision
1.0
1.1
1.2
1.3
1.4
1.5
Date
March 13, 2000
March 15, 2000
March 17, 2000
March 22, 2000
April 4, 2000
April 10, 2000
April 26, 2000
1.6
April 28, 2000
1.7
May 25, 2000
1.8
June 13, 2000
1.9
June 15, 2000
2.0
June 29, 2000
Comments
Initial Production Revision
Addition of ATA_EN mode current
Removed reference to 16 byte ATAPI command block
support
Added length restriction to USB string descriptors
Added text to indicate a serial number string descriptor
is required for MSC compliance
Fixed READ/LOAD_CONFIG parameter descriptions.
Added Internal ROM values to ISD-200 Configuration
table.
Changed description of some ISD-200 Configuration
bits.
Restructured the outline to avoid conflicting statements
and redundancy.
Fixed Table of Tables and Table of Figures
Cleaned up and added text on the BUS_POWER pin
and related issues.
Made suggested enhancements from review in text.
Several references clarified.
First silicon “Rev A” references changed to “first
silicon” (ISD-200 “0002” or F731727).
Second silicon “Rev B” references changed to “second
silicon” (ISD-200 “0003” or F731727A).
Clarify First & Second silicon differences in power
management section.
Added Second silicon errata.
Fixed some typographical errors.
Clarified I_MODE references.
Fixed several references for consistency.
Fixed some ATACB descriptions.
Added more errata.
6
In-System Design Confidential