AB-2061G-33 Datasheet, PDF (6/32 Pages) List of Unclassifed Manufacturers – 33Mhz PCI to Local Bus Interface

Applications
The chip can be used in many different
applications where interfacing to a
peripheral device such as a printer or a
scanner is required. The device can be
used to connect two processor systems
and their respective buses with a high
speed interface so that there is no
degradation in processing time on either
side of the systems by allowing fully
asynchronous access from both sides
of the system.
Figure 2 gives an overview of low-cost
yet high-speed network interface
applications for which this chip is
suitable.
EXAMPLE for a Network
Interface Card
Figure 3 shows a Network Interface with
a bus connector to interface to a printer
controller board.
NIC
Card
Figure 2
Printer Controller Board
- 6 - rev 1.2
PCI PCI PCI
PCI BUS
1:33Mhz
PCI Bus I/O Slot
2061-33
Local BUS
CPU RAM ROM
Network Interface Card
Figure 3