|
LM3S317 Datasheet, PDF (360/379 Pages) List of Unclassifed Manufacturers – Microcontroller | |||
|
◁ |
Electrical Characteristics
19
19.1
19.1.1
Electrical Characteristics
DC Characteristics
Maximum Ratings
The maximum ratings are the limits to which the device can be subjected without permanently
damaging the device.
Note: The device is not guaranteed to operate properly at the maximum ratings.
Table 19-1. Maximum Ratings
Characteristica
Symbol
Value
Unit
Supply voltage range (VDD)
VDD
0.0 to +3.6
V
Input voltage
VIN
-0.3 to 5.5
V
Maximum current for pins, excluding pins
I
100
mA
operating as GPIOs
Maximum current for GPIO pins
I
100
mA
a. Voltages are measured with respect to GND.
19.1.2
Important: This device contains circuitry to protect the inputs against damage due to high-static
voltages or electric fields; however, it is advised that normal precautions be taken to
avoid application of any voltage higher than maximum-rated voltages to this
high-impedance circuit. Reliability of operation is enhanced if unused inputs are
connected to an appropriate logic voltage level (for example, either GND or VDD).
Recommended DC Operating Conditions
Table 19-2. Recommended DC Operating Conditions
Parameter
VDD
VIH
VIL
VSIH
VSIL
VOH
VOL
Parameter Name
Supply voltage
High-level input voltage
Low-level input voltage
High-level input voltage for Schmitt trigger inputs
Low-level input voltage for Schmitt trigger inputs
High-level output voltage
Low-level output voltage
Min
3.0
2.0
-0.3
0.8 * VDD
0
2.4
-
Nom
3.3
-
-
-
-
-
-
Max
Unit
3.6
V
5.0
V
1.3
V
VDD
V
0.2 * VDD
V
-
V
0.4
V
360
May 4, 2007
Preliminary
|
▷ |