BCM43362KUBG Datasheet, PDF (67/84 Pages) Cypress Semiconductor – Single-Chip IEEE 802.11™ b/g/n MAC/Baseband/Radio + SDIO

BCM43362 Data Sheet
WLAN 2.4 GHz Transmitter Performance Specifications
Table 17: WLAN 2.4 GHz Transmitter Performance Specifications (Cont.)
Parameter
Condition/Notes
Minimum Typical Maximum Unit
Tx power control dynamic –
9
range
Closed loop Tx power Across full temperature and voltage –
variation at highest power range. Applies across 5 to 21 dBm
level setting (at RF port) output power range.
Carrier suppression
–
15
Gain control step
–
–
Return loss
Zo = 50
4
Load pull variation for
output power, EVM, and
Adjacent Channel Power
Ratio (ACPR)
VSWR = 2:1.
EVM degradation –
Output power
–
variation
ACPR-compliant –
power level
VSWR = 3:1.
EVM degradation –
Output power
–
variation
ACPR-compliant –
power level
–
–
–
±1.5
–
–
0.25
–
6
–
3.5
–
±2
–
15
–
4
–
±3
–
15
–
dB
dB
dBc
dB
dB
dB
dB
dBm
dB
dB
dBm
a. The cellular standards listed indicate only typical usages of that band in some countries. Other standards may
also be used within those bands.
b. Derate by 1.5 dB for temperatures less than –10°C or more than 55°C, or voltages less than 3.0V. Derate by
3.0 dB for voltages of less than 2.7V or voltages of less than 3.0V at temperatures less than –10°C or greater
than 55°C.
c. Tx power for Ch 1 and Ch 11 is specified separately by nonvolatile memory parameters to ensure band-edge
compliance.
Broadcom_®
February 13, 2015 • 43362-DS106-R
IEEE 802.11 b/g/n MAC/Baseband/Radio + SDIO
Page 66
BROADCOM CONFIDENTIAL