BCM43362KUBG Datasheet, PDF (58/84 Pages) Cypress Semiconductor – Single-Chip IEEE 802.11™ b/g/n MAC/Baseband/Radio + SDIO

BCM43362 Data Sheet
DC Characteristics
Section 10: DC Characteristics
Note: Values in this document are design goals and are subject to change based on the results of
device characterization.
Absolute Maximum Ratings
Caution! The absolute maximum ratings in Table 11 indicate levels where permanent damage to the
device can occur, even if these limits are exceeded for only a brief duration. Functional operation is not
guaranteed under these conditions. Operation at absolute maximum conditions for extended periods
can adversely affect long-term reliability of the device.
Table 11: Absolute Maximum Ratings
Rating
Symbol
Value
Unit
DC supply for VBAT
VBAT
–0.5 to 6.0
V
DC supply for WLAN power amplifier
VDDPA
–0.5 to 6.0
V
DC supply voltage for I/O
VDDIO, VDDIO_SD
–0.5 to 4.1
V
DC supply voltage for RF blocks in chip
VDDRF
–0.5 to 1.29
V
DC supply voltage for core
VDD
–0.5 to 1.29
V
DC supply voltage for RF I/Os
VDDIO_RF
–0.5 to 4.1
V
DC input supply voltage for CLDO and LNLDO –
–0.5 to 2.1
V
WRF_VCO_LDO_IN_VDD1P8
–
–0.5 to 2.75
V
WRF_TCXO_VDD3P3
–
–0.5 to 3.63
V
WL_RST_N
–
–0.5 to 3.63
V
EXT_SMPS_REQ
–
–0.5 to 3.63
V
EXT_PWM_REQ
–
–0.5 to 3.63
V
Maximum undershoot voltage for I/O
Maximum overshoot voltage for I/O
Maximum Junction Temperature
V_undershoot
V_overshoot
T_j
– 0.5
V
VDDIO + 0.5
V
125
°C
Broadcom_®
February 13, 2015 • 43362-DS106-R
IEEE 802.11 b/g/n MAC/Baseband/Radio + SDIO
Page 57
BROADCOM CONFIDENTIAL