C0402C150J5GACAUTO Datasheet, PDF (9/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series A1000 & CB1000
Single Row Terminal Blocks Continued
Mounting Options
Right Angle Bends (A1 only)
Right angle terminals are offered on the A1000 Series. Configurations are
defined in these dimensions: X = pin extension beyond the block base;
Z = length from block base to centerline of the terminal tip. Standard bends
consist of the X and Z dimensions shown in the chart. Specify by adding the
selected Bend Option Code to the terminal part number.
Inches (Millimeters)
Z
X
Bend
Option
X
Z
Code
(minimum)
R26 (04 terminal only)
R45 (07 terminal only)
0.14 (3.5)
0.33 (8.4)
0.09 (2.3)
0.09 (2.3)
Dimensions in inches. To convert to millimeters, multiply by 25.4.
Angle Brackets (A1 only)
Drilled Right Angle (A1 only)
0.150
0.250
0.04
0.320
0.450
Option AB
Angle brackets enable block to be fastened
at right angles to normal mount position.
Bulk part number 1AB-J.
Mounting Plates
MOUNTING
PLATE
MP
0.325
0.12
0.144 HOLE
w/0.312 C' BORE
Option DR
Counterbored holes across mount ends of
block enable fastening with two screws at
right angles to normal mount position.
MT
Options MP & MT
MP Metal inserts with 0.150” (3.8) dia. hole
accept
#6 screw. MT Metal inserts with tapped
hole accept #6-32 screw.
Bulk part numbers 1MP-J & 1MT-J.
For additional product information, visit www.cooperbussmann.com/magnum
5