C0402C150J5GACAUTO Datasheet, PDF (20/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series CB3000
Single Row Terminal Blocks
Part Numbering System
Series
IC IB 3I
Terminal Style
II
CB3 - closed back
01 - handwired #6-32 screw
02 - printed circuit #6-32 screw
03 - non feed-thru #6-32 screw
07 - extended pin #6-32 screw
14 - printed circuit #6-32 screw
51 - handwired #8-32*
52 - printed circuit #8-32*
53 - non feed-thru #8-32*
57 - extended pin #8-32*
64 - printed circuit #8-32*
*Note: #8-32 screw is a special
with #6-32 head.
Terminal Styles
Base/End
I
Poles
II
Screws
IIII
1 - mount end
2 - barrier end
5 - closed base/
mount end
02 to 28
02 to 26 on mount
end base
07 - steel SEMS
(standard)
09 - brass SEMS
nickel-plated
CA - SEMS captive
Base/End Note: 5 Style only available
with 03 terminals.
Options
III
AB - angle mounting brackets (pg 17)
A7 to A9 - 0.250” QC
B7 to B9 - 0.187” QC
EB - exit back terminals
L1 to L6 marking options (pg 22)
LT1 to LT6 marking options (pg 22)
†_{OJ3 & OJ7 - over barrier jumpers}
MP, MP8, MT & MT8 mtg. plates (pg 17)
S1 - solder lug/flat
Covers - (pg 23)
†Contact factory for configuration.
Inches (Millimeters)
0.120
(3.05)
0.40
(10.2)
0.18
(4.6)
0.031
(0.79)
01
Handwired #6-32 screw
51
#8-32 screw
0.045
(1.14)
0.19
(4.8 )
0.18
(4.6)
0.031
(0.79)
02
Printed Circuit #6-32 screw
52
#8-32 screw
03
Non Feed-Thru #6-32 screw
53
#8-32 screw
Available on Mount End (5) only.
0.70
(17.8)
0.062
(1.57)
0.18
(4.6)
0.031
(0.79)
07
Extended Pin #6-32 screw
57
#8-32 screw
0.045
(1.14)
0.125
(3.18)
0.18
(4.6)
0.031
(0.79)
14
Printed Circuit #6-32 screw
64
#8-32 screw
Screw Options
07
Steel SEMS
Zinc-Plated
(standard)
09
Brass SEMS
Nickel-Plated
* NOTE: Wire ready screws standard on all terminal styles.
CB3 Terminal Exit Options
Inches (Millimeters)
0.18
(4.6)
Exit Rear (std.)
16
0.255
(6.48)
EB
Exit Back
For additional product information, visit www.cooperbussmann.com/magnum