C0402C150J5GACAUTO Datasheet, PDF (11/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series A2000 & LP2000
Single Row Terminal Blocks
Part Numbering System
Series
I^A I²
I^L I^P I²
Terminal Style
II
Base/End
I
Poles
II
Screw Options
IIII
Options
III
A2 - standard barrier 01 - handwired
LP2 - low profile 02 - printed circuit
barrier
03 - non feed-thru
04 - wire wrap tail
05 - extended handwired
06 - handwired
07 - extended pin
08 - printed circuit
09 - 0.250˝ QC short
10 - 0.187˝ QC
14 - printed circuit
19 - 0.250˝ QC long
0 - flat base/molded 02 to 32
mount end
02 to 30 on mount
1 - flat base/mnt. end
end base
2 - flat base/barrier end
3 - insulator base/mnt. end
4 - insulator base/
barrier end
5 - closed base/
mount end
6 - closed base/
molded mount end
9 - insulator base/
molded mount end
Base/End Note: 0, 6,
9 styles not available
with covers. 5 & 6
Styles only available
with 03 terminals.
Blank - std. screw
00 - screws shipped bulk
03 - stainless steel
04 - brass nickel-plated
07 - steel SEMS
(not available
with hardware options)
09 - brass SEMS
nickel-plated
(not available with
hardware options)
CA - captive screw
WR - wire ready
(not available on LP2
series)
AB - angle mnt. options (pg 9)
A1 to A9 - 0.250˝ QC
B1 to B9 - 0.187˝ QC
DR - drilled right angle (pg 9)
†_{JA, JB & JC - barrier jumpers}
L1 to L6 marking options (pg 22)
MP, MP8 & MT mounting plates (pg 9)
†_{OJ2 & OJ4 - over barrier jumpers (not}
available w/covers)
RC - retaining clips (pg 9)
R30 to R77 - right angle bends (pg 9)
SO - stand off insulators (pg 9)
S1 - solder lug/flat
Covers - (pg 23)
†Contact factory for configuration.._.
Terminal Styles
Inches (Millimeters)
0.031
(.79)
0.55
(14.0)
0.110
(2.79)
01
Handwired
0.031
(0.79)
0.20
(5.1)
0.062
(1.57)
02
Printed Circuit
03
Non Feed-Thru
0.55
(14.0)
0.031
(0.79)
0.062
(1.57)
04
Wire Wrap Tail
0.66
(16.8)
0.031
(0.79)
0.110
(2.79)
05
Extended Handwired
0.031
(0.79)
0.30
(7.6)
06
Handwired
0.11
(2.79)
0.54
(13.7)
0.055
(1.40)
0.14
(3.6)
07
Extended Pin
0.032
(0.81)
0.031
(0.79)
0.17
(4.3)
0.062
(1.57)
08
Printed Circuit
0.031
(0.79)
0.40
(10.2)
0.250
(6.35)
09
0.250˝ QC short
0.42
(10.7)
0.031
(0.79)
10
0.187˝ QC
0.187
(4.75)
0.031
(0.79)
0.125
(3.2)
0.062
(1.57)
14
Printed Circuit
0.33
(8.4)
0.31
(7.9)
0.72
(18.3)
0.41
(10.4)
0.031
(0.79)
0.250
(6.35)
19
30.250˝ QC long
For additional product information, visit www.cooperbussmann.com/magnum
7