C0402C150J5GACAUTO Datasheet, PDF (19/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series A3000 & LP3000
Single Row Terminal Blocks Continued
Mounting Options
Inches (Millimeters)
Right Angle Bends (A3, LP3 only)
Right angle terminals are offered on the A3000 & LP3000 Series.
Configurations are defined in these dimensions: X = pin extension beyond the
block base; Z = length from block base to centerline of the terminal tip.
Standard bends consist of the X and Z dimensions shown in the chart.
Specify by adding the selected Bend Option Code to the terminal part
number.
04 Terminal Bend Configurations
07 Terminal Bend Configurations
Z
0.55
Bend
Option
Code
R30
R35
R36
R39
R42
R46
R48
R50
X
(minimum)
0.04
0.01
0.02
0.05
0.08
0.12
0.14
0.16
Angle Brackets (A3, LP3 only)
Z
0.82
X
X
Z
0.28
0.23
0.22
0.19
0.16
0.12
0.10
0.08
Available
w/insulator
base
Bend
Option
Code
X
(minimum)
Available
Z
w/insulator
base
R30
0.04
0.55
Yes
No
R35
0.01
0.50
Yes
No
R36
0.02
0.49
Yes
No
R50
0.16
0.35
No
No
R53
0.19
0.32
No
No
R66
0.32
0.19
No
No
R69
0.35
0.16
No
No
R75
0.41
0.10
No
No
R77
0.43
0.08
No
Dimensions in inches. To convert to millimeters, multiply by 25.4.
Drilled Right Angle (A3, LP3 only)
0.25
0.04
0.45
0.15
0.32
Option AB
Angle brackets enable block to be fastened
at right angles to normal mount position.
Bulk part number 2AB-J.
Mounting Plates
0.437
0.24
0.144 HOLE
w/0.312 C' BORE
Option DR
Counterbored holes across mount ends of
block enable fastening with two screws at
right angles to normal mount position.
Standoffs
Retaining Clip
MOUNTING
PLATE
MP
MP8
MT
Options MP, MP8 & MT
MP Metal inserts with 0.150” dia. hole
accept #6 screw. MP8 Metal inserts with
0.187” dia. hole accept #8-32 screw. MT
Metal inserts with tapped hole accept #6-32
screw.
0.300
STANDOFF
Option SO
Standoff mounts are tubes molded to the
mounting positions. Available with insulator
bases only.
RETAINING CLIP
Option RC
Use on standoff tubes. Fit panels up to
0.125” thick. Two clips for every five
positions. Supplied unassembled. Bulk part
number H541-J.
For additional product information, visit www.cooperbussmann.com/magnum
15