C0402C150J5GACAUTO Datasheet, PDF (6/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Part Numbering System
Series
IA I5
IC IB I5
A5 - standard barrier
CB5 - closed back
Terminal Style
II
01 - handwired
02 - printed circuit
03 - non feed-thru
04 - wire wrap tail
Base/End
I
1 - mount end
2 - barrier end
Terminal Styles
Poles
Screw Options
Options
II
02 to 30
02 to 28 on mount
end base
II
07 - steel SEMS
std. wire ready
III
C1 to C8 - 0.110˝ QC
L1 to L6 marking options (pg 22)
LT1 to LT6 marking options (CB5 only-pg 22)
MP - mounting plate 0.120˝ dia
*OJ - over barrier jumper
S1 - single solder lug/flat
S2 - double solder lug/flat (A5 only)
*Contact factory for configuration
Inches (Millimeters)
0.10
(2.54)
0.40
(10.2)
0.12
(3.0)
01
Handwired
0.025
(.64)
0.055
(1.40)
0.16
(4.1)
0.14
(3.6)
0.032
(0.81)
02
Circuit Board
CB5 Terminal Exit Options
03
Non Feed-Thru
0.50
(12.7)
0.045
(1.14)
0.12
(3.0)
04
Wire Wrap Tail
0.025
(0.64)
Inches (Millimeters)
0.12
(3.0)
Exit Rear (std.)
Screw Options Wire ready screws standard on all terminal styles (Bulk ordering part numbers are in parentheses.)
07
Steel SEMS
Zinc-Plated
(B001-7035-J)
07
Standard
Wire Ready
Hardware Options (Bulk ordering part numbers are in parentheses.)
Jumpers
Quick Connects Blade Width 0.110” (For other orientations, contact factory.)
Inches (Millimeters)
Solder Lugs
0.56 (14.3)
(OJ12-J)
2
(5C1-J)*
(5C2-J)*
(5C4-J)*
S1 (5S1-J)
1.12 (28.4)
C7 (5C7-J)
* N/A on CB5 Series.
C8 (5C8-J)
S2 (5S2-J)
For additional product information, visit www.cooperbussmann.com/magnum