C0402C150J5GACAUTO Datasheet, PDF (17/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series A3000 & LP3000
Single Row Terminal Blocks
Part Numbering System
Series
IA I3
IL IP I3
Terminal Style
Base/End
(Views pg. 15)
Poles
II I
II
Screw Options
IIII
Options
III
A3 - standard barrier
LP3 - low profile
barrier
ready (A3 only)
01 - handwired
02 - printed circuit
03 - non feed-thru
04 - wire wrap tail
05 - extended
handwired
06 - handwired
07 - extended pin
08 - printed circuit
09 - 0.250 QC short
10 - 0.187 QC
14 - printed circuit
19 - 0.250 QC long
1 - flat base/mnt. end 02 to 28
2 - flat base/barrier end 02 to 26 on mount
3 - insulator base/
end base
mnt. end
4 - insulator base/
barrier end
*5 - closed base/
mount end
*Base/End Note: 5 Style only available
with 03 terminals.
Blank - std. screw
00 - screws shipped bulk
03 - stainless steel
04 - brass nickel-plated
07 - steel SEMS
zinc-plated
(not available with
hardware options)
09 - brass SEMS
nickel-plated
(not available with
hardware options)
07WR - steel SEMS wire
ready (A3 only)
CA - captive screw
AB - angle mnt. options (pg 15)
A1 to A9 - 0.250” QC
B1 to B9 - 0.187” QC
DR - drilled right angle (pg 15)
†_{J201 - flat slip-on jumper}
L1 to L6 marking options (pg 22)
MP, MP8 & MT mounting plates (pg 15)
†_{OJ3, OJ5 & OJ7 - over barrier jumpers}
RC - retaining clips (pg 15)
R30 to R77 - right angle bends (pg 15)
SO - stand off insulators (pg 15)
S1 - solder lug/flat
†Contact factory for configuration.
Terminal Styles
Inches (Millimeters)
0.55
(14.0)
0.031
(.79)
01
Handwired
0.110
(2.79)
0.031
(0.79)
0.20
(5.1)
0.062
(1.57)
02
Printed Circuit
03
Non Feed-Thru
0.55
(14.0)
0.031
(0.79)
0.062
(1.57)
04
Wire Wrap Tail
0.66
(16.8)
0.031
(0.79)
0.110
(2.79)
05
Extended Handwired
0.031
(0.79)
0.30
(7.6)
06
Handwired
0.11
(2.79)
0.82
(20.8)
0.031
(0.79)
07
Extended Pin
0.062
(1.57 )
0.031
(0.79)
0.17
(4.3)
0.062
(1.57)
08
Printed Circuit
0.031
(0.79)
0.40
(10.2)
0.250
(6.35)
09
0.250˝ QC Short
0.031
(0.79)
0.42
(10.7)
10
0.187˝ QC
0.031
(0.79)
0.187
(4.75)
0.125
(3.2)
0.062
(1.57)
14
Printed Circuit
0.33
(8.4)
0.31
(7.9)
0.72
(18.3)
0.41
(10.4)
0.031
(0.79)
0.250
(6.35)
19
0.250˝ QC Long
Screw Options
Standard
Zinc-Plated Steel
03
Stainless Steel
04
Brass
Nickel-Plated
07
Steel SEMS
Zinc-Plated
(F523-J)
09
Brass SEMS
Nickel-Plated
07WR
Wire Ready
(A3 only)
For additional product information, visit www.cooperbussmann.com/magnum
13