C0402C150J5GACAUTO Datasheet, PDF (13/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series A2000 & LP2000
Single Row Terminal Blocks Continued
Mounting Options
Right Angle Bends (A2, LP2 only)
Right angle terminals are offered on the A2000 & LP2000 Series.
Configurations are defined in these dimensions: X = pin extension beyond the
block base; Z = length from block base to centerline of the terminal tip.
Standard bends consist of the X and Z dimensions shown in the chart.
Specify by adding the selected Bend Option Code to the terminal part
number.
04 Terminal Bend Configurations
Z
0.55
X
07 Terminal Bend Configurations
Z
0.82
X
Bend
Option
X
Z
Code
(minimum)
Available
w/insulator
base
Bend
Option
Code
R30
R35
R36
R39
R42
R46
R48
R50
X
(minimum)
0.04
0.01
0.02
0.05
0.08
0.12
0.14
0.16
Angle Brackets (A2, LP2 only)
Z
0.28
0.23
0.22
0.19
0.16
0.12
0.10
0.08
Available
w/insulator
base
No
No
No
No
No
No
No
No
R30
0.04
R35
0.01
R36
0.02
R42
0.08
R46
0.12
R50
0.16
R53
0.19
R66
0.32
R69
0.35
R75
0.41
R77
0.43
0.55
Yes
0.50
Yes
0.49
Yes
0.43
Yes
0.39
Yes
0.35
No
0.32
No
0.19
No
0.16
No
0.10
No
0.08
No
Dimensions in inches. To convert to millimeters, multiply by 25.4.
Drilled Right Angle (A2, LP2 only)
0.25
0.04
0.45
0.15
0.32
Option AB
Angle brackets enable block to be fastened
at right angles to normal mount position.
Bulk part number 2AB-J.
Mounting Plates
MOUNTING
PLATE
MP
MP8
0.325
0.12
0.144 HOLE
w/0.312 C' BORE
Option DR
Counterbored holes across mount ends of
block enable fastening with two screws at
right angles to normal mount position.
Standoffs
Retaining Clip
MT
Options MP, MP8 & MT
MP Metal inserts with 0.150” dia. hole
accept #6 screw. MP8 Metal inserts with
0.187” dia. hole accept #8-32 screw. MT
Metal inserts with tapped hole accept #6-32
screw.
0.300
STANDOFF
Option SO
Standoff mounts are tubes molded to the
mounting positions. Available with insulator
bases only.
RETAINING CLIP
Option RC
Use on standoff tubes. Fit panels up to
0.125” thick. Two clips for every five
positions. Supplied unassembled. Bulk part
number H541-J.
For additional product information, visit www.cooperbussmann.com/magnum
9