C0402C150J5GACAUTO Datasheet, PDF (144/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Depluggable PCB Mount Terminal Blocks
Series 15133
Depluggable PCB Mount
Terminal Blocks
SPECIFICATIONS
Rating: 20A, 300V
Center Spacing: 0.375” or 3/8” (9.52mm)
Wire Range: #12-22 AWG
Number of Poles: 7- to 10-poles
PC Board: For soldering to PCB (.00015” tin over
copper flash)
Material: Black, UL Rated 94V0 Thermoplastic
Screws: #6-32 zinc-plated steel SEMS
Torque Rating: 12 lb-in
Terminals: 15133-XX-10-X – Tin or gold plated brass
15133-XX-20-X – Nickel-or gold-plated copper
alloy plug terminal, tin-or
gold-plated female terminal
Operating Temperature: 221°F (105°C)
Agency Information: UL File E62622
APPLICATIONS
The 15133 is a series of input/output circuit board
connectors. Available in a 1-piece or 2-piece design, they
stack side-by-side with self-aligning housings to prevent
incorrect mating. Both designs feature an integral, living
hinge cover that saves the labor of attaching a separate
cover. The cover provides a dead front for prevention of
electrical contact, yet it also has test probe holes for easy
circuit testing.
The 1-piece design is for applications not requiring
deplugging the connector. It solders to the printed circuit
board. Molded stand-offs ensure good solderability.
The 2-piece design enables quick connect and disconnect
of several circuits at once. It allows fast board changing in
the field without shutting down the entire system. The
bottom section of the connector solders to the board. Male
contacts are shrouded while the female has stand-offs; both
are molded into the block. The top section of the connector
plugs into the bottom section.
15133-06-20-T
Dimensions - in (mm)
15133-XX-10-X
6
0.25
(6.3)
0.19
(4.8)
0.37
(9.4)
0.81 0.83
(20.6) (21.0)
0.875
(22.2)
0.16
(3.9)
0.04
(1.0)
15133-XX-20-X
0.12 DIA.
(3.17)
0.06
(1.6)
0.44
(11.1)
0.70
(17.8)
0.03
(0.8)
0.25
6 6 _(6.4)
0.156
(3.96)
0.19
(4.8)
0.81
(20.6)
0.828
(21.0)
0.04
(1.0)
0.375
(9.52)
0.97
(24.6)
0.062
(1.57)
0.52
(13.2)
0.70
(17.8)
0.02
(0.5)
Part Numbering System
Inches (Millimeters)
Series
I1 I5 I1 I3 I3
* Consult Factory
140
Poles
Style
– II – I
02 to 10
1 - One piece
2 - Two piece
Mounting
I–
0 - No mtg. holes
Terminal Plating
I
T - Tin
G - Gold*
For additional product information, visit www.cooperbussmann.com/magnum