C0402C150J5GACAUTO Datasheet, PDF (14/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series CB2000
Single Row Terminal Blocks
Part Numbering System
Series
IC IB I2
Terminal Style
II
CB2 - closed back
01 - handwired
02 - printed circuit
03 - non feed-thru
07 - extended pin
14 - printed circuit
22 - dual tail printed circuit
Terminal Styles
Base/End
I
1 - mount end
2 - barrier end
Poles
II
Screws
IIII
Options
III
02 to 32
02 to 30 on mount
end base
03 - stainless steel
*AB - angle mounting brackets (pg 11)
04 - brass nickel-plated A7 to A9 - 0.250” QC
07 - steel SEMS
B7 to B9 - 0.187” QC
standard
EB - exit back terminals
09 - brass SEMS
EF - exit front terminals
nickel-plated
†JA, JB & JC - barrier jumpers
CA - captive screw
L1 to L6 marking options (pg 22)
07CA - SEMS captive LT1 to LT6 marking options (pg 22)
†OJ2 & OJ4 - over barrier jumpers
MP, MP8, MT & MT8 mtg. plates (pg 11)
S1 - solder lug/flat
*Only available on 3-poles and up.
†Contact factory for configuration._.
Inches (Millimeters)
0.120
(3.05)
0.40
(10.2)
0.18
(4.6)
01
Handwired
0.031
(0.79) 0.045
(1.14)
0.19
(4.8 )
0.18
(4.6)
02
Printed Circuit
0.031
(0.79)
0.062
(1.57)
03
Non Feed-Thru
Available on Mount
End (1) only.
0.70
(17.8)
0.18
(4.6)
07
Extended Pin
0.031
(0.79)
0.045
(1.14)
0.125
(3.18)
0.18
(4.6)
14
Printed Circuit
0.031
(0.79)
0.045
(1.14)
0.81
(4.6)
0.03
(0.79)
0.40
(10.2)
0.43
(10.9)
0.19
(4.9)
22
Dual Tail
Printred Circuit
Screw Options (Bulk ordering part numbers are in parentheses.)
03
Stainless Steel
(F507-J)
04
Brass
nickel-plated
(F506-J)
07
Steel SEMS
zinc-plated
(BOO1-7084-J)
* NOTE: Wire ready screws standard on all terminal styles.
CB2 Terminal Exit Options
09
Brass SEMS
nickel-plated
(F524-J)
Inches (Millimeters)
0.18
(4.6)
Exit Rear (std.)
0.18
(4.6)
X
EF Exit Front
0.255
(6.48)
EB Exit Back
10
For additional product information, visit www.cooperbussmann.com/magnum