C0402C150J5GACAUTO Datasheet, PDF (21/148 Pages) Cooper Bussmann, Inc. – Make Wire Connections Simple and Fast

Terminal Blocks - Single Row
Series CB3000
Single Row Terminal Blocks Continued
Hardware Options (Bulk ordering part numbers are in parentheses.)
Inches (Millimeters)
Solder Lugs
0.68 (17.3)
Jumpers
Quick Connects
Blade Width A = 0.250”. Blade Width B = 0.187”.
0.84 (21.2)
S1
(2S1-J)
†_J201
Flat slip-on
(J201-J)
†_OJ3
(OJ3-J)
A7 & B7
(2A7-J & 2B7-J)
A8 & B8
(2A8-J & 2B8-J)
A9 & B9
(2A9-J & 2B9-J)
†_OJ7
(OJ7-J)
†Contact factory for pole configuration.
Mounting Options
Inches (Millimeters)
Right Angle Mounting Bracket
End Positions
usable
Snap-in Angle Bracket
A
0.71
(18.0)
Exit Back (EB)
Terminals
Angle
Bracket
0.24
(6.1)
0.42
(10.7)
Mounts blocks on PC boards at a right angle.
• Protects solder joints.
• Recommended for all EB (Exit Back) PCB terminal blocks.
• Bracket snaps securely on block (no hardware required).
• Minimum strip length (end positions are usable).
• Mount with #6-32 or #8-32 screws (not supplied).
0.79
(20.1)
1.02
(25.8)
A
Option AB
Mounting Plates
MOUNTING
PLATE
MP
MP8
Options MP, MP8, MT & MT8
MP Metal inserts with 0.150” dia. hole accept #6 screw.
MP8 Metal inserts with 0.187” dia. hole accept #8-32 screw.
MT
MT8
MT Metal inserts with tapped hole accept #6-32 screw.
MT8 Metal inserts with tapped hole accept #8-32 screw.
Chassis
or PCB
#6 or #8
mounting
screw & nut
(Customer
supplied.)
0.45
(11.4)
For additional product information, visit www.cooperbussmann.com/magnum
17