EP9312 Datasheet, PDF (14/62 Pages) Cirrus Logic – Universal Platform System-on-chip Processor

EP9312
Universal Platform SOC Processor
Timings
Timing Diagram Conventions
This data sheet contains one or more timing diagrams. The following key explains the components used in these
diagrams. Any variations are clearly labelled when they occur. Therefore, no additional meaning should be attached
unless specifically stated.
Clock
High to Low
High/Low to High
Bus Change
Bus Valid
Undefined/Invalid
Valid Bus to Tristate
Bus/Signal Omission
Timing Conditions
Figure 1. Timing Diagram Drawing Key
Unless specified otherwise, the following conditions are true for all timing measurements.
• T_A = 0 to 70° C
• CVDD = VDD_PLL = 1.8V
• RVDD = 3.3 V
• All grounds = 0 V
• Logic 0 = 0 V, Logic 1 = 3.3 V
• Output loading = 50 pF
• Timing reference levels = 1.5 V
• The Processor Bus Clock (HCLK) is programmable and is set by the user. The frequency is typically between
33 MHz and 100 MHz (92 MHz for industrial conditions).
14
©Copyright 2005 Cirrus Logic (All Rights Reserved)
DS515PP7