PS-AT65609EHW Datasheet, PDF (6/30 Pages) ATMEL Corporation – MICROCIRCUIT, DIGITAL, MEMORY, 8K x 8-Bit, 5V Very Low Power CMOS SRAM, MONOLITHIC SILICON

PS-AT65609EHW
Rev A
2 APPLICABLE DOCUMENTS
MIL-PRF-38535 ............................................. Integrated Circuits, Manufacturing, General Specification for.
MIL-STD-883 ................................................. Test Method Standard Microcircuits.
ASTM Standard F1192-95 ............................ Standard guide for the measurement of single event
phenomena from heavy ion irradiation of semiconductor
devices
JEDEC Standard EIA/JESD78 ...................... IC latch-up test
ATMEL Aerospace Products Quality Flows
In the event of a conflict between the text of this drawing and the references cited herein, the text of this
drawing takes precedence.
3 REQUIREMENTS
3.1 Design, construction, and physical dimensions.
The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein.
3.1.1 Timing waveforms
The timing waveforms shall be as specified in Timing waveforms section page 19.
3.1.2 Package type
The package shall be a DIL side-brazed 600 Mils, 28 leads as specified in Package drawing section
page 24. The case shall be hermetically sealed and have a ceramic body. The leads shall be
brazed.
3.1.3 Terminal connections
The terminal connections shall be as specified in Terminal connections section page25.
3.1.4 Block diagram
The block diagram and the truth table shall be as specified in Block diagram and truth table section
page 26.
3.2 Marking
Each component shall be marked in respect of:
(a) Lead Identification
(b) Component Number
(c) Traceability Information
(d) Manufacturer’s Component Number
3.2.1 Lead Identification
An index shall be located at the top of the package in the position defined in Package drawing
section page 24.
3.2.2 Component Number
Each component shall bear the component number which shall be constituted and marked as
follows :
AT65609EHW – CI 40 SV
Product identification
Package (CI = 28-lead DIL side-brazed)
Speed (40 = 40 ns)
Level (MQ=Military Level B, SV=Space Level B, SR=Space Level B RHA)
6/30