TMD2725 Datasheet, PDF (5/50 Pages) ams AG – The device features advanced proximity measurement

TMD2725 − Electrical Characteristics
Electrical Characteristics
Figure 6:
Electrical Characteristics of TMD2725
All limits are guaranteed. The parameters with min and max
values are guaranteed with production tests or SQC (Statistical
Quality Control) methods.
Symbol
Parameter
Conditions
Min Typ Max Unit
f_OSC
Oscillator frequency
8.0
MHz
Active ALS State
(PON=AEN=1, PEN=0) ⁽²⁾
80 150
IDD
Supply Current ⁽¹⁾
Idle State
(PON=1,AEN=PEN=0) ⁽³⁾
30
60
μA
Sleep State ⁽⁴⁾
0.7
5
VOL INT, SDA output low voltage 6mA sink current
0.6
V
ILEAK Leakage current, SDA,SCL,INT
-5
5
μA
VIH
SCL, SDA input high voltage ⁽⁵⁾
1.26
V
VIL
SCL, SDA input low voltage
0.54
V
T_Active
Time from power-on to ready
to receive I²C commands
1.5
ms
Note(s):
1. Values are shown at the VDD pin and do not include current through the IR LED.
2. This parameter indicates the supply current during periods of ALS integration. If Wait is enabled (WEN=1), the supply current is
lower during the Wait period.
3. Idle state occurs when PON=1 and all functions are not enabled.
4. Sleep state occurs when PON = 0 and I²C bus is idle. If Sleep state has been entered as the result of operational flow, SAI = 1, PON
will remain high.
5. Digital pins: SDA, SCL, INT, are tolerant to a communication voltage up to 3.0V
Figure 7:
Recommended Operating Conditions
Parameter
V_DD supply range
V_LEDA supply voltage range ⁽¹⁾
Voltage on pin with respect to ground; SDA, SCL, INT
Min
Typ
Max
Unit
1.7
1.8
2.0
V
3.0
3.3
3.6
V
-0.3
3.6
V
Note(s):
1. While the device is operational across the temperature range, performance will vary with temperature. Operational characteristics
are at 25°C, unless otherwise noted.
ams Datasheet
[v1-11] 2016-Sep-20
Page 5
Document Feedback