TMD2725 Datasheet, PDF (24/50 Pages) ams AG – The device features advanced proximity measurement

TMD2725 − RegisterDescription
Addr: 0x8C
PERS
Bit Bit Name Default Access
Bit Description
This register sets the ALS persistence filter.
0
Every ALS Cycle
1
Any value outside ALS thresholds
2
2 consecutive ALS values out of range
3:0
APERS
0x0
RW
3
3 consecutive ALS values out of range
4
5 consecutive ALS values out of range
5
10 consecutive ALS values out of range
6
15 consecutive ALS values out of range
7
20 consecutive ALS values out of range
…
…
13
50 consecutive ALS values out of range
14
55 consecutive ALS values out of range
15
60 consecutive ALS values out of range
The frequency of consecutive proximity channel results outside
of threshold limits are counted; this count value is compared
against the PPERS value. If the counter is equal to the PPERS
value an interrupt is asserted. Any time a proximity channel
result is inside the threshold values the counter is cleared.
The frequency of consecutive photopic channel results outside
of threshold limits are counted; this count value is compared
against the APERS value. If the counter is equal to the APERS
setting an interrupt is asserted. Any time a photopic channel
result is inside the threshold values the counter is cleared.
Page 24
Document Feedback
ams Datasheet
[v1-11] 2016-Sep-20