AM186EM Datasheet, PDF (84/98 Pages) List of Unclassifed Manufacturers – MICROCONTROLLER BLOCK DIAGRAM

PRELIMINARY
SWITCHING CHARACTERISTICS over COMMERCIAL operating range
Clock (20 MHZ and 25 MHz)
Parameter
No. Symbol
Description
CLKIN Requirements
36
t_CKIN X1 Period^(a)
37
t_CLCK X1 Low Time (1.5 V)^(a)
38 t_CHCK X1 High Time (1.5 V)^(a)
39
t_CKHL X1 Fall Time (3.5 to 1.0 V)^(a)
40
t_CKLH X1 Rise Time (1.0 to 3.5 V)^(a)
CLKOUT Timing
Preliminary
20 MHz
25 MHz
Min
Max
Min
Max Unit
50
60
40
60 ns
15
15
ns
15
15
ns
5
5
ns
5
5
ns
42 t_CLCL CLKOUTA Period
43
t_CLCH
CLKOUTA Low Time
(C_L=50 pF)
44
t_CHCL
CLKOUTA High Time
(C_L=50 pF)
45
t_CH1CH2
CLKOUTA Rise Time
(1.0 to 3.5 V)
46
t_CL2CL1
CLKOUTA Fall Time
(3.5 to 1.0 V)
50
40
ns
0.5t_CLCL – 2
= 23
0.5t_CLCL – 2
= 18
ns
0.5t_CLCL – 2
= 23
0.5t_CLCL – 2
= 18
ns
3
3
ns
3
3
ns
61 t_LOCK Maximum PLL Lock Time
69 t_CICOA X1 to CLKOUTA Skew
70 t_CICOB X1 to CLKOUTB Skew
1
1
ms
15
15 ns
21
21 ns
Notes:
All timing parameters are measured at 1.5 V with 50 pF loading on CLKOUTA unless otherwise noted. All output test conditions
are with C_L = 50 pF. For switching tests, V_IL = 0.45 V and V_IH = 2.4 V, except at X1 where V_IH = V_CC – 0.5 V.
a The specifications for CLKIN are applicable to the normal PLL and CLKDIV2 modes.
The PLL should be used for operations from 16.667 MHz to 40 MHz. For operations below 16.667 MHz, the CLKDIV2 mode
should be used.
Because the CLKDIV2 input frequency is two times the system frequency, the specifications for twice the frequency should
be used for CLKDIV2 mode. For example, use the 20 MHz CLKIN specifications for 10 MHz operation.
84
Am186/188EM and Am186/188EMLV Microcontrollers