HC311 Datasheet, PDF (9/26 Pages) Altera Corporation – HardCopy III Device

Chapter 1: DC and Switching Characteristics of HardCopy III Devices
1–7
Electrical Characteristics
Table 1–8. On-Chip Termination Variation after Power-up Calibration – Preliminary (Note 1), (2)
Symbol
Description
V_CCIO (V)
3.0
2.5
dR/dV
OCT variation with voltage without
re-calibration
1.8
1.5
1.2
3.0
2.5
dR/dT
OCT variation with temperature without
re-calibration
1.8
1.5
1.2
Note to Table 1–8:
(1) Valid for VCCIO range of ± 5% and temperature range of 0° to 85° C.
(2) Pending silicon characterization.
Commercial
Typical
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Unit
%/mV
%/mV
%/mV
%/mV
%/mV
%/°C
%/°C
%/°C
%/°C
%/°C
Pin Capacitance
Table 1–9 shows the HardCopy III device family pin capacitance.
Table 1–9. HardCopy III Device Capacitance – Preliminary (Note 1)
Symbol
Parameter
C_IOTB
Input capacitance on top and bottom I/O pins
CIOLR
Input capacitance on left and right I/O pins
CC L KT B
Input capacitance on top and bottom dedicated clock input pins
CCL K L R
Input capacitance on left and right dedicated clock input pins
COUTFB
Input capacitance on dual-purpose clock output and feedback pins
C C C and C CLK1, CLK3, CLK8,
CLK 10
Input capacitance for dedicated clock input pins
Note to Table 1–9:
(1) Pending silicon characterization.
Typical Unit
TBD pF
TBD pF
TBD pF
TBD pF
TBD pF
TBD pF
Hot Socketing
Table 1–10 lists the hot socketing specifications for HardCopy III devices.
Table 1–10. HardCopy III Hot Socketing Specifications – Preliminary (Note 1)
Symbol
I_{I O PIN (D C )}
II O PIN (A C)
Note to Table 1–10:
(1) Pending silicon characterization.
Parameter
DC current per I/O pin
AC current per I/O pin
Maximum
300 μA
8 mA for ≤ 10 ns
© December 2008 Altera Corporation
HardCopy III Device Handbook, Volume 3