|
EP2C5F256C7N Datasheet, PDF (136/168 Pages) Altera Corporation – Section I. Cyclone II Device Family Data Sheet | |||
|
◁ |
Timing Specifications
Table 5â43. Cyclone II I/O Output Delay for Row Pins (Part 4 of 4)
I/O Standard
Fast Corner
Drive
Strength
Parameter
Industrial
/Auto-
motive
Commer-
cial
â6
Speed
Grade
â7
Speed
Grade
(2)
â7
Speed
Grade
(3)
â8
Speed
Grade
Unit
LVDS
RSDS
MINI_LVDS
PCI
PCI-X
â
tO P
tD I P
â
tO P
tD I P
â
tO P
tD I P
â
tO P
tD I P
â
tO P
tD I P
1216
1340
1216
1340
1216
1340
989
1113
989
1113
1275
1407
1275
1407
1275
1407
1036
1168
1036
1168
2089 2184 2272 2278 ps
2297 2421 2545 2545 ps
2089 2184 2272 2278 ps
2297 2421 2545 2545 ps
2089 2184 2272 2278 ps
2297 2421 2545 2545 ps
2070 2214 2352 2358 ps
2278 2451 2625 2625 ps
2070 2214 2352 2358 ps
2278 2451 2625 2625 ps
Notes to Table 5â43:
(1) This is the default setting in the Quartus II software.
(2) These numbers are for commercial devices.
(3) These numbers are for automotive devices.
Maximum Input and Output Clock Rate
Maximum clock toggle rate is defined as the maximum frequency
achievable for a clock type signal at an I/O pin. The I/O pin can be a
regular I/O pin or a dedicated clock I/O pin.
The maximum clock toggle rate is different from the maximum data bit
rate. If the maximum clock toggle rate on a regular I/O pin is 300 MHz,
the maximum data bit rate for dual data rate (DDR) could be potentially
as high as 600 Mbps on the same I/O pin.
Table 5â44 specifies the maximum input clock toggle rates. Table 5â45
specifies the maximum output clock toggle rates at default load.
Table 5â46 specifies the derating factors for the output clock toggle rate
for non-default load.
To calculate the output toggle rate for a non-default load, use this
formula:
The toggle rate for a non-default load
5â46
Cyclone II Device Handbook, Volume 1
Altera Corporation
February 2008
|
▷ |