AK4569 Datasheet, PDF (8/45 Pages) Asahi Kasei Microsystems – 20-Bit Stereo CODEC with IPGA & HP-AMP

ASAHI KASEI
[AK4569]
FILTER CHARACTERISTICS
(Ta=25°C; AVDD, DVDD, HVDD=2.5 ∼ 3.6V; fs=44.1kHz; DEM=OFF; BOOST=OFF)
Parameter
Symbol
min
typ
max
Units
ADC Digital Filter (LPF):
Passband
(Note 15) ±0.1dB
PB
0
17.4
kHz
−1.0dB
−3.0dB
-
20.0
-
kHz
-
21.1
-
kHz
Stopband
(Note 15)
SB
25.7
kHz
Passband Ripple
PR
±0.1
dB
Stopband Attenuation
SA
65
dB
Group Delay
(Note 16)
GD
-
17.0
-
1/fs
Group Delay Distortion
∆GD
0
µs
ADC Digital Filter (HPF):
Frequency Response (Note 15) −3dB
FR
3.4
Hz
−0.5dB
10
Hz
−0.1dB
22
Hz
DAC Digital Filter: (Note 14)
Passband
(Note 15) ±0.1dB
PB
0
19.6
kHz
−0.7dB
-
20.0
-
kHz
−6.0dB
-
22.05
-
kHz
Stopband
(Note 15)
SB
25.2
kHz
Passband Ripple
PR
±0.01
dB
Stopband Attenuation
SA
59
dB
Group Delay
(Note 16)
GD
-
16.8
-
1/fs
Group Delay Distortion
∆GD
0
µs
DAC Digital Filter + Analog Filter: (Note 14)(Note 17)
Frequency Response 0 ∼ 20.0kHz
FR
-
±1.0
-
dB
BOOST Filter:
(Note 17) (Note 18)
Frequency Response
20Hz
FR
-
5.74
-
dB
MIN 100Hz
-
2.92
-
dB
1kHz
-
0
-
dB
20Hz
FR
-
5.94
-
dB
MID 100Hz
1kHz
-
4.71
-
dB
-
0.14
-
dB
20Hz
FR
-
16.04
-
dB
MAX 100Hz
1kHz
-
10.55
-
dB
-
0.3
-
dB
Note 14. BOOST OFF (BST1-0 = “00”)
Note 15. The passband and stopband frequencies scale with fs.
For example (DAC), PB=0.44*fs(@±0.1dB), SB=0.57*fs(@−59dB).
Note 16. This is the calculated delay time caused by digital filtering. This time is measured from the input of analog signal
to setting the 20 bit data of both channels on input register to the output register of ADC. This time also includes
group delay of HPF. For DAC, this time is from setting the 20 bit data of both channels on input register to the
output of analog signal.
Note 17. DACL Æ HPL, DACR Æ HPR, DACL/R Æ MOUT.
Note 18. These frequency responses scale with fs. If high-level signal is input, the AK4569 clips at low frequency.
MS0292-E-01
-8-
2005/07