AK4569 Datasheet, PDF (5/45 Pages) Asahi Kasei Microsystems – 20-Bit Stereo CODEC with IPGA & HP-AMP

ASAHI KASEI
[AK4569]
„ Handling of Unused Pin
The unused I/O pins should be processed appropriately as below.
Classification
Analog
Digital
Pin Name
HPR, HPL, MOUT, AINR2, AINL2,
AINR1, AINL1
SDTO
SDTI
Setting
These pins should be open.
This pin should be open.
This pin should be connected to DVSS.
ABSOLUATE MAXIMUM RATING
(AVSS, DVSS, HVSS=0V; Note 1)
Parameter
Symbol
min
max
Power Supplies Analog
AVDD
−0.3
4.6
Digital
DVDD
−0.3
4.6
HP-AMP
HVDD
−0.3
4.6
|AVSS – HVSS| (Note 2) ∆GND1
-
0.3
|AVSS – DVSS| (Note 2) ∆GND2
-
0.3
Input Current (any pins except for supplies)
IIN
-
±10
Analog Input Voltage
(Note 3) VINA
−0.3
(AVDD+0.3) or 4.6
Digital Input Voltage
(Note 4) VIND
−0.3
(DVDD+0.3) or 4.6
Ambient Temperature
Ta
−40
85
Storage Temperature
Tstg
−65
150
Note 1. All voltages with respect to ground.
Note 2. AVSS, DVSS and HVSS must be connected to the same analog ground plane.
Note 3. MIN, RIN, LIN, AINR2, AINL2, AINR1, AINL1 pins.
Max is smaller value between (AVDD+0.3) and 4.6V.
Note 4. PDN, CSN, CCLK, CDTI, LRCK, MCLK, BICK, SDTI pins.
Max is smaller value between (DVDD+0.3) and 4.6V.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
Units
V
V
V
V
V
mA
V
V
°C
°C
RECOMMEND OPERATING CONDITIONS
(AVSS, DVSS, HVSS=0V; Note 1)
Parameter
Symbol
min
typ
max
Units
Power Supplies Analog
AVDD
2.5
3.0
3.6
V
Digital
(Note 5) DVDD 2.5 or (AVDD−0.3) 3.0 3.6 or (AVDD+0.3) V
HP-AMP
HVDD
2.5
3.0
3.6
V
Note 1. All voltages with respect to ground.
Note 5. Min is larger value between 2.5V and (AVDD−0.3). Max is smaller value between 3.6V and (AVDD+0.3).
* AKM assumes no responsibility for usage beyond the conditions in this datasheet.
MS0292-E-01
-5-
2005/07