AK4495EQ Datasheet, PDF (41/63 Pages) Asahi Kasei Microsystems – Quality-oriented Premium 32-Bit 2ch DAC

[AK4495S/95]
(2) RESET by MCLK or LRCK/WCK Stop
The AK4495S/95 is automatically placed in reset state when MCLK or LRCK is stopped during PDM mode
(PDN pin =“H”), and the analog outputs are floating (Hi-Z). When MCLK and LRCK are input again, the
AK4495S/95 exits reset state and starts the operation. Zero detect function is disable when MCLK or LRCK is
stopped. In DSD mode the AK4495S/95 is in reset state when MCLK is stopped, and it is in reset state when
MCLK and WCK are stopped in external digital filter mode.
AVDD pin
DVDD pin
RSTB pin
(1)
Internal
State
Power-down
Normal Operation
Digital Circuit Power-down
Normal Operation
D/A In
(Digital)
Power-down
D/A Out
(Analog)
Clock In
MCLK, BICK, LRCK
Hi-Z
(4)
GD (2)
(3)
(4)
(5)
(4)
(5)
MCLK, BICK, LRCK Stop
GD (2)
External
MUTE
(6)
(6)
(6)
Notes:
(1) After AVDD and DVDD are powered-up, the PDN pin should be “L” for 150ns.
(2) The analog output corresponding to digital input has group delay (GD).
(3) The digital data can be stopped. Click noise after MCLK and LRCK are input again can be reduced by
inputting “0” data during this period.
(4) Click noise occurs within 3 ~ 4LRCK cycles from the riding edge (“↑”) of the PDN pin or MCLK
inputs. This noise occurs even when “0” data is input.
(5) Clocks (MCLK, BICK, LRCK/WCK) can be stopped in the reset state (MCLK or LRCK/WCK is
stopped).
(6) Mute the analog output externally if click noise (4) influences system applications. The timing example
is shown in this figure.
Figure 23. Reset Sequence Example 2
MS1560-E-02
- 41 -
2014/04