AK4495EQ Datasheet, PDF (40/63 Pages) Asahi Kasei Microsystems – Quality-oriented Premium 32-Bit 2ch DAC

[AK4495S/95]
■ Reset Function
(1) RESET by RSTN bit = “0”
When the RSTN bit = “0”, the AK4495S/95’s digital block is powered down, but the internal register values
are not initialized. In this time, the analog outputs go to VCML/R voltage and DZFL/DZFR pins are “H”.
Figure 22 shows an example of reset by RSTN bit.
RSTN bit
Internal
RSTN bit
Internal
State
D/A In
(Digital)
D/A Out
(Analog)
DZF
3~4/fs (5)
2~3/fs (5)
Normal Operation
(1)
GD
Digital Block
Power-down
“0” data
(3) (2)
Normal Operation
GD (1)
(3)
2/fs(4)
(6)
Notes:
(1) The analog output corresponding to digital input has group delay (GD).
(2) Analog outputs settle to VCOM voltage.
(3) Small pop noise occurs at the edges(“ ”) of the internal timing of RSTN bit. This noise is output
even if “0” data is input.
(4) The DZF pins change to “H” when the RSTN bit becomes “0”, and return to “L” at 2/fs after RSTN bit
becomes “1”.
(5) There is a delay, 3~4/fs from RSTN bit “0” to the internal RSTN bit “0”, and 2~3/fs from RSTN bit “1”
to the internal RSTN bit “1”.
(6) Mute the analog output externally if click noise (3) and Hi-Z (2) adversely affect system performance
Figure 22. Reset Sequence Example 1
MS1560-E-02
- 40 -
2014/04