Z86L9900100ZEM Datasheet, PDF (32/70 Pages) Zilog, Inc. – ICEBOX

PERFORMING OTP PROGRAMMING
The Z86L9900100ZEM ICEBOX is designed for OTP programming. To perform OTP pro-
gramming perform the following steps:
1. Locate the supplied OTP adapter for the micro controller you wish to program. Consult
Table 1-1for the proper OTP adapter.
2. Insert the OTP adapter into the emulator’s OTP Programming socket (J1 and J2), see
Figure 2-3.
3. Place the micro controller into the OTP programing adapter.
4. If the adapter is equipped with a ziff socket, ensure that the ZIF socket locking lever is in
the down (closed) position.
5. Perform OTP programing. Consult the ZDS user manual for more information on OTP
programing.
6. Pull straight up on the micro controller to remove it from the OTP programing adapter.
NOTE: Be careful not to bend the micro controller’s pins when removing it from the OTP adapter.