Z86L9900100ZEM Datasheet, PDF (31/70 Pages) Zilog, Inc. – ICEBOX

Set-Up and Installation
Emulator Operation
TABLE 2-3. DIP SETTINGS TO SET PULL-UP RESISTORS (CONTINUED)
DIP bank Switch Description
S4
6
Turn on to set a pull-up resistor for Port 5 Pin 5
S4
7
Turn on to set a pull-up resistor for Port 5 Pin 6
S4
8
Turn on to set a pull-up resistor for Port 5 Pin 7
S5
1
Turn on to set a pull-up resistor for Port 6 Pin 0
S5
2
Turn on to set a pull-up resistor for Port 6 Pin 1
S5
3
Turn on to set a pull-up resistor for Port 6 Pin 2
S5
4
Turn on to set a pull-up resistor for Port 6 Pin 3
S5
5
Turn on to set a pull-up resistor for Port 6 Pin 4
S5
6
Turn on to set a pull-up resistor for Port 6 Pin 5
S5
7
Turn on to set a pull-up resistor for Port 6 Pin 6
S5
8
Turn on to set a pull-up resistor for Port 6 Pin 7
S6
1
Turn on to set a pull-up resistor for Port 4 Pin 0
S6
2
Turn on to set a pull-up resistor for Port 4 Pin 1
S6
3
Turn on to set a pull-up resistor for Port 4 Pin 2
S6
4
Turn on to set a pull-up resistor for Port 4 Pin 3
S6
5
Turn on to set a pull-up resistor for Port 4 Pin 4
S6
6
Turn on to set a pull-up resistor for Port 4 Pin 5
S6
7
Turn on to set a pull-up resistor for Port 4 Pin 6
S6
8
Turn on to set a pull-up resistor for Port 4 Pin 7
NOTE: Mask option pull-up resistance at 3V is about 200k Ohm +/-50% at room temperature. Lower
voltage may cause an increase in resistance.
UM005100-IRR0400
2–13