XC1800 Datasheet, PDF (12/16 Pages) Xilinx, Inc – XC1800 Series of In-System

R
XC1800 Series of In-System Programmable Configuration PROMs
Absolute Maximum Ratings
Symbol
Description
Value
Units
V_CC
Supply voltage relative to GND
-0.5 to +4.0
V
V_IN
Input voltage with respect to GND
-0.5 to +5.5
V
V_TS
Voltage applied to 3-state output
-0.5 to +5.5
V
T_STG
Storage temperature (ambient)
-65 to +150
°C
T_SOL
T_J
Maximum soldering temperature (10 s @ 1/16 in.)
Junction Temperature
+260
°C
+150
°C
Notes
1:
Maximum DC undershoot below GND must be limited to either 0.5V or 10mA, whichever is easier to achieve. During
transitions, the device pins may undershoot to -2.0V or overshoot to +7.0V, provided this over- or undershoot lasts less then
10 ns and with the forcing current being limited to 200mA.
2:
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating
Conditions is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device
reliability.
Recommended Operating Conditions
Symbol
Parameter
V_CCINT
V_CCO
Commercial Internal Voltage supply (T_A = 0°C to +70°C)
Industrial
Internal Voltage supply (T_A = -40°C to +85°C)
Supply voltage for output drivers for 3.3V operation
Supply voltage for output drivers for 2.5V operation
V_IL
Low-level input voltage
V_IH
High-level input voltage
V_O
Output voltage
Quality and Reliability Characteristics
Min
Max Units
3.0
3.6
V
3.0
3.6
V
3.0
3.6
V
2.3
2.7
V
0
0.8
V
2.0
5.5
V
0
V_CCO
V
Symbol
t_DR
N_PE
V_ESD
Description
Data Retention
Program/Erase Cycles (Endurance)
Electrostatic Discharge (ESD)
Min
10
10,000
2,000
Max
Units
-
Years
-
Cycles
-
Volts
12
September 17, 1999 (Version 1.3)