W89C940 Datasheet, PDF (8/61 Pages) Winbond – ELANC-PCI (TWISTED-PAIR ETHER-LAN CONTROLLER WITH PCI INTERFACE)

W89C940
POWER PINS
NAME
AGND
NUMBER
80
TYPE
I
Analog Ground:
DESCRIPTION
Ground pin for internal analog circuitry.
It is recommended that there is a decoupling capacitor connected between the
power supply pins and ground pins. A RC low pass filter is also recommended to
be used for analog power supply.
Note: Signal Type Definition
in
Input is a standard input-only signal
out Totem Pole output is a standard active driver.
t/s Tri-State is a bi-directional, tri-state input/output pin.
s/t/s Sustained Tri-State is an active low tri-state signal owned and driven by one and only one agent
at a time. The agent that drives an s/t/s pin low must drive it high for at least one clock before
letting it float. A new agent cannot start driving a s/t/s signal any sooner than one clock after the
previous owner tri-states it. A pull-up is required to sustain the inactive state until another agent
drives it, and must be provided by the central resource.
o/d Open Drain allows multiple devices to share as a wire-OR.
8