W83697HF Datasheet, PDF (72/167 Pages) Winbond – WINBOND I/O

W83697HF/F
6. PARALLEL PORT
6.1 Printer Interface Logic
The parallel port of the W83627HF makes possible the attachment of variou s devices that accept eight
bits of parallel data at standard TTL level. The W83627HF supports an IBM XT/AT compatible parallel
port (SPP), bi -directional parallel port (BPP), Enhanced Parallel Port (EPP), Extended Capabilities
Parallel Port (ECP), Extension FDD mode (EXTFDD), Extension 2FDD mode (EXT2FDD) on the parallel
port. Refer to the configuration registers for more information on disabling, power-down, and on selecting
the mode of operation.
Table 6-1 shows the pin definitions for different modes of the parallel port.
TABLE 6-1-1 PARALLEL PORT CONNECTOR AND PIN DEFINITIONS
HOST
CONNECTOR
1
PIN NUMBER
OF W83627HF
36
PIN
ATTRIBUTE
O
SPP
nSTB
2-9
31-26, 24-23
I/O
PD<0:7>
10
22
I
nACK
11
21
I
BUSY
12
19
I
PE
13
18
I
SLCT
14
35
O
nAFD
15
34
I
nERR
16
33
O
nINIT
17
32
O
nSLIN
Notes:
n<name > : Active Low
1. Compatible Mode
2. High Speed Mode
3. For more information, refer to the IEEE 1284 standard.
EPP
ECP
nWrite
PD<0:7>
Intr
nWait
PE
Select
nDStrb
nError
nInit
nA Strb
nSTB, HostClk²
PD<0:7>
nACK, PeriphClk²
BUSY, PeriphAck²
PEerror, nAckReverse²
SLCT, Xflag²
nAFD, HostAck²
nFault¹, nPeriphRequest²
nINIT¹, nReverseRqst²
nSLIN¹ , ECPMode²
- 63 -
Publication Release Date: Feb. 2002
Revision 0.70