|
W83697HF Datasheet, PDF (13/167 Pages) Winbond – WINBOND I/O | |||
|
◁ |
W83697HF
Flash ROM Interface
⢠Support up to 4M flash ROM
General Purpose I/O Ports
⢠48 programmable general purpose I/O ports
⢠General purpose I/O ports can serve as simple I/O ports, watch dog
output, infrared I/O pins, suspend LED output, Beep output
⢠Functional in power down mode
timer output, power LED
Hardware Monitor Functions
⢠Smart fan control system, support âThermal CruiseTMâ and âSpeed CruiseTMâ
⢠2 thermal inputs from optionally remote thermistors or 2N3904 transistors or PentiumTM II/III thermal
diode output
⢠6 positive voltage inputs (typical for +12V, -12V, +5V, -5V, +3.3V, Vcore)
⢠2 intrinsic voltage monitoring (typical for Vbat, +5VSB)
⢠2 fan speed monitoring inputs
⢠2 fan speed control
⢠Build in Case open detection circuit
⢠WATCHDOG comparison of all monitored values
⢠Programmable hysteresis and setting points for all monitored items
⢠Over temperature indicate output
⢠Automatic Power On voltage detection Beep
⢠Issue SMI#, IRQ, OVT# to activate system protection
⢠Winbond Hardware DoctorTM Support
⢠Intel LDCM TM / Acer ADMTM compatible
Package
⢠128-pin PQFP
Publication Release Date:Feb. 2002
-4-
Revision 0.70
|
▷ |