W83697HF Datasheet, PDF (126/167 Pages) Winbond – WINBOND I/O

W83697HF/F
9.7.31 Temperature Sensor 2 Configuration Register - Index 52h (Bank 1)
Register Location:
52h
Power on Default Value
00h
Size:
8 bits
7 65432 1 0
STOP2
INTMOD
Reserved
FAULT
FAULT
Reserved
Reserved
Reserved
Bit 7-5: Read - Reserved. This bit should be set to 0.
Bit 4-3: Read/Write - Number of faults to detect before setting OVT# output to avoid false tripping due
to noise.
Bit 2: Read - Reserved. This bit should be set to 0.
Bit 1: Read/Write - OVT# Interrupt mode select. This bit default is set to 0, which is compared mode.
When set to 1, interrupt mode will be selected.
Bit 0: Read/Write - When set to 1 the sensor will stop monitor.
9.7.32 Temperature Sensor 2 Hysteresis (High Byte) Register - Index 53h (Bank 1)
Register Location:
53h
Power on Default Value
4Bh
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
THYST2<8:1>
Bit 7-0: Temperature hysteresis bit 8-1, which is High Byte. The temperature default 75 degree C.
- 117 -
Publication Release Date: Feb. 2002
Revision 0.70