W83697HF Datasheet, PDF (100/167 Pages) Winbond – WINBOND I/O

W83697HF/F
9.5 SMI# interrupt mode
9.5.1 Voltage SMI# mode :
SMI# interrupt for voltage is Two-Times Interrupt Mode. Voltage exceeding high limit or going below
low limit will causes an interrupt if the previous interrupt has been reset by reading all the interrupt
Status Register. (Figure 9.6 )
9.5.2 Fan SMI# mode :
SMI# interrupt for fan is Two-Times Interrupt Mode. Fan count exceeding the limit, or exceeding and
then going below the limit, will causes an interrupt if the previous interrupt has been reset by reading
all the interrupt Status Register. (Figure 9.7 )
Figure 9.6
Figure 9.7
- 91 -
Publication Release Date: Feb. 2002
Revision 0.70