W91031 Datasheet, PDF (15/29 Pages) Winbond – LOW POWER CMOS INTERGRATED CIRCUIT

Preliminary W91031
DC Electrical Characteristics, continued
PARAMETER
CONDITION
Schmitt Input High Threshold RNGDI, RNGRC
Schmitt Input Low Threshold
SLEEP
Schmitt Hysteresis
CMOS Input High Voltage
CMOS Input Low Voltage
Output High Source Current
Output Low Sink Current
Input Current 1
Input Current 2
Output High-Z Current 1
Output High-Z Current 2
Output High-Z Current 3
Reference Output Voltage
DCLK, MODE,
FSKE
RGNON, DCLK,
DATA, FDRN,
FCDN, ALGO,
ALGRC, ALGR
RGNON, DCLK,
DATA, FDRN,
FCDN, ALGO,
ALGRC, ALGR,
INTN
RNGRC
INP, INN,
RNGDI
SLEEP, DCLK,
MODE, FSKE
RNGRC
ALGRC
INTN
VREF
Reference Output Resistance
Comparator Threshold Voltage
VREF
ALGRC
SYM.
VT+
VT-
VHYS
VIH
VIL
IOH
IOL
IOL
IIN1
IIN2
IOZ1
IOZ2
IOZ3
VRef
RRef
VCPth
MIN. TYP.* MAX. UNITS
0.48 VDD
0.28 VDD
0.2
0.7 VDD
VSS
0.5
0.68 V
VDD
V
0.48
VDD
V
VDD
V
0.3 VDD
mA
TEST/
NOTES
Note 1
0.5
mA Note 2
2.5
0.5 VDD
-4%
0.5 VDD
-4%
mA Note 2
1
µA Note 3, 5
10
µA Note 3, 5
1
µA
5
µA
10
µA
0.5 VDD V
+4%
2
KΩ
0.5 VDD V
+4%
Note
4, 5
Note 6
Tests:
1: All input pins are VDD or VSS except for oscillator pins, no analog inputs, output unloaded and SLEEP = VDD.
2: All input pins are VDD or VSS except for oscillator pins, no analog inputs, output unloaded, SLEEP = VSS and FSKE = VDD or
FSKE = VSS.
Notes:
" * " Typical figure are at VDD = 5V and temperature = 25° C are design aids only, not guaranteed and not subject to production
testing.
1. VOH = 0.9 VDD.
2. VOL = 0.1 VDD.
3. VIN = VDD to VSS.
4. VOUT = VDD to VSS.
5. Magnitude measurement, ignore signs.
6. Output - no load.
- 15 -
Publication Release Date: August 2000
Revision A1