TC94A29FB Datasheet, PDF (1/20 Pages) Toshiba Semiconductor – TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TC94A29FAG/FB
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC94A29FAG, TC94A29FB
Single-Chip CD Processor with Built-in Controller (CD-CX)
The TC94A29FAG/FB is a single-chip CD processor for digital
servo, which incorporates a 4-bit microcontroller.
The controller features an LCD driver, 4-channel 6-bit AD
converter, 1 port 2-channel 2/3-line or UART serial interface
module, a buzzer, 20-bit general-purpose counter function,
interrupt function, and 8-bit timer/counter. The CPU can select
one of four operating clocks (16.9344-MHz, 75-kHz or 32.768-kHz
crystal oscillator and CR oscillator), facilitating interface with the
CD processor.
The CD processor incorporates sync separation protection and
interpolation, EFM demodulator, error correction, digital
equalizer for servo, and servo controller. The CD processor also
incorporates a 1-bit DA converter. In combination with the
TA2157F/FN digital servo head amplifier, the TC94A29FAG/FB
can very simply configure an adjustment-free CD player.
Thus, the IC is suitable for CD systems for automobiles and
radio-cassette players.
TC94A29FAG
TC94A29FB
Features
· Single-chip CD processor with on-chip CMOS LCD driver and
4-bit microcontroller
· Operating supply voltage:
CD in operation: VDD = 3.0 to 3.6 V (3.3 V typ.)
CD stopped: VDD = 1.8 to 3.6 V (only CPU in operation)
Weight
LQFP64-P-1010-0.50: 0.32 g (typ.)
QFP64-P-1212-0.65: 0.45 g (typ.)
· Supply current:
CD in operation: IDD = 30 mA (typ.)
CD stopped: IDD = 1.5 mA (CD standby mode, with 16.9344-MHz crystal oscillator, CPU in operation)
CD stopped: IDD = 50 µA (CD standby mode, with 75-kHz crystal oscillator, CPU in operation)
· Operating temperature range: Ta = −40 to 85°C
· Package: LQFP/QFP-64 (0.5/0.65-mm pitch, 1.4 mm thick)
· E²PROM: TC94AE29FAG/FB
1
2003-04-01