DS64MB201_13 Datasheet, PDF (6/32 Pages) Texas Instruments – Dual Lane 2:1/1:2 Mux/Buffer with Equalization and De-Emphasis

DS64MB201
SNLS307E – JANUARY 2011 – REVISED JULY 2013
www.ti.com
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (VDD)
LVCMOS Input/Output Voltage
Differential Input Voltage
Differential Output Voltage
Analog (SD_TH)
Junction Temperature
Storage Temperature
Maximum Package Power Dissipation at
25°C
NJY Package
Derate NJY Package
ESD Rating
HBM, STD - JESD22-A114C
MM, STD - JESD22-A115-A
CDM, STD - JESD22-C101-C
Thermal Resistance
For soldering specifications:
θ_JC
θ_JA, No Airflow, 4 layer JEDEC
See product folder at http://www.ti.com/lit/SNOA549
-0.5V to +3.0V
-0.5V to +4.0V
-0.5V to (VDD+0.5V)
-0.5V to (VDD+0.5V)
-0.5V to (VDD+0.5V)
+125°C
-40°C to +125°C
4.21 W
52.6mW/°C above +25°C
≥6 kV
≥250 V
≥1250 V
11.5°C/W
19.1°C/W
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. Absolute
Maximum Numbers are ensured for a junction temperature range of -40°C to +125°C. Models are validated to Maximum Operating
Voltages only.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office / Distributors for
availability and specifications.
Recommended Operating Conditions
Min
Typ
Supply Voltage
VDD to GND
Ambient Temperature⁽¹⁾
2.375
2.5
-40
25
SMBus (SDA, SCL)
0
CML Differential Input Voltage
Supply Noise Tolerance up to 50 MHz⁽²⁾
0
100
(1) OOB signal pass-through limited to a minimum ambient temperature of -10C
(2) Allowed supply noise (mV_P-P sine wave) under typical conditions.
Max
2.625
+85
3.6
2.0
Units
V
°C
V
Vp-p
mV_P-P
Electrical Characteristics
Over recommended operating supply and temperature ranges with default register settings unless other specified.⁽¹⁾
Symbol
Parameter
Conditions
Min
Typ
Max
POWER
PD
Power Dissipation
2.5V Operation
EQx = 0, DEMx = 0 dB,
K28.5 pattern,
VOD = 1.0 V p-p
Channel powerdown⁽²⁾
850
950
11
LVCMOS / LVTTL DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
I_IH
Input High Current
V_IN = 3.3V
2.0
3.6
0
0.8
-15
+15
Units
mW
mW
V
V
μA
(1) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(2) Measured with ENSMB = 1, all channels disabled using SMBus registers 0x01 and 0x02, and EQ in bypass (Default)
6
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: DS64MB201