CC430F6137_14 Datasheet, PDF (53/120 Pages) Texas Instruments – MSP430™ SoC With RF Core

www.ti.com
ECCN 5E002 TSPA - Technology / Software Publicly Available
CC430F6137, CC430F6135, CC430F6127, CC430F6126, CC430F6125
CC430F5137, CC430F5135, CC430F5133
SLAS554H – MAY 2009 – REVISED SEPTEMBER 2013
PMM, Brown-Out Reset (BOR)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
V(DV_CC_BOR_IT–) BOR_H on voltage, DV_CC falling level
V(DV_CC_BOR_IT+) BOR_H off voltage, DV_CC rising level
V(DV_CC_BOR_hys) BOR_H hysteresis
t_RESET
Pulse duration required at RST/NMI pin to accept a reset
| dDV_CC/d_t | < 3 V/s
| dDV_CC/d_t | < 3 V/s
0.80 1.30
60
2
MAX
1.45
1.50
250
UNIT
V
V
mV
µs
PMM, Core Voltage
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
V_CORE3(AM)
V_CORE2(AM)
V_CORE1(AM)
V_CORE0(AM)
V_CORE3(LPM)
V_CORE2(LPM)
V_CORE1(LPM)
V_CORE0(LPM)
Core voltage, active mode, PMMCOREV = 3
Core voltage, active mode, PMMCOREV = 2
Core voltage, active mode, PMMCOREV = 1
Core voltage, active mode, PMMCOREV = 0
Core voltage, low-current mode, PMMCOREV = 3
Core voltage, low-current mode, PMMCOREV = 2
Core voltage, low-current mode, PMMCOREV = 1
Core voltage, low-current mode, PMMCOREV = 0
2.4 V ≤ DV_CC ≤ 3.6 V
2.2 V ≤ DV_CC ≤ 3.6 V
2.0 V ≤ DV_CC ≤ 3.6 V
1.8 V ≤ DV_CC ≤ 3.6 V
2.4 V ≤ DV_CC ≤ 3.6 V
2.2 V ≤ DV_CC ≤ 3.6 V
2.0 V ≤ DV_CC ≤ 3.6 V
1.8 V ≤ DV_CC ≤ 3.6 V
1.90
1.80
1.60
1.40
1.94
1.84
1.64
1.44
MAX
UNIT
V
V
V
V
V
V
V
V
PMM, SVS High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
I_(SVSH)
SVS current consumption
SVSHE = 0, DV_CC = 3.6 V
SVSHE = 1, DV_CC = 3.6 V, SVSHFP = 0
SVSHE = 1, DV_CC = 3.6 V, SVSHFP = 1
SVSHE = 1, SVSHRVL = 0
0
200
1.5
1.53 1.60
V_{(SVSH_IT–)} SVS_H on voltage level⁽¹⁾
SVSHE = 1, SVSHRVL = 1
SVSHE = 1, SVSHRVL = 2
1.73 1.80
1.93 2.00
SVSHE = 1, SVSHRVL = 3
2.03 2.10
SVSHE = 1, SVSMHRRL = 0
1.60 1.70
SVSHE = 1, SVSMHRRL = 1
1.80 1.90
SVSHE = 1, SVSMHRRL = 2
2.00 2.10
V_{(SVSH_IT+)} SVS_H off voltage level⁽¹⁾
SVSHE = 1, SVSMHRRL = 3
SVSHE = 1, SVSMHRRL = 4
2.10 2.20
2.25 2.35
SVSHE = 1, SVSMHRRL = 5
2.52 2.65
SVSHE = 1, SVSMHRRL = 6
2.85 3.00
SVSHE = 1, SVSMHRRL = 7
2.85 3.00
t_pd(SVSH)
SVS_H propagation delay
t_(SVSH)
dV_DVCC/dt
SVS_H on or off delay time
DV_CC rise time
SVSHE = 1, dV_DVCC/dt = 10 mV/µs, SVSHFP = 1
SVSHE = 1, dV_DVCC/dt = 1 mV/µs, SVSHFP = 0
SVSHE = 0 → 1, dV_DVCC/dt = 10 mV/µs, SVSHFP = 1
SVSHE = 0 → 1, dV_DVCC/dt = 1 mV/µs, SVSHFP = 0
2.5
20
12.5
100
0
MAX UNIT
nA
µA
1.67
1.87
V
2.07
2.17
1.80
2.00
2.20
2.30
V
2.50
2.78
3.15
3.15
µs
µs
1000 V/s
(1) The SVS_H settings available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply Voltage
Supervisor chapter in the CC430 Family User's Guide (SLAU259) on recommended settings and usage.
Copyright © 2009–2013, Texas Instruments Incorporated
Submit Documentation Feedback
53
Product Folder Links: CC430F6137 CC430F6135 CC430F6127 CC430F6126 CC430F6125 CC430F5137
CC430F5135 CC430F5133