CC2564MODN Datasheet, PDF (41/62 Pages) Texas Instruments – Bluetooth Host Controller Interface (HCI) Module

www.ti.com
7 Device and Documentation Support
CC2564MODN, CC2564MODA
SWRS160D – FEBRUARY 2014 – REVISED DECEMBER 2015
NOTE
Information in this section is not part of the TI component specification, and TI does not
warrant its accuracy or completeness. TI’s customers are responsible for determining
suitability of components for their purposes. Customers should validate and test their design
implementation to confirm system functionality.
7.1 Device Certification and Qualification
The TI CC2564MODx module is certified for the FCC, IC, and ETSI/CE. Moreover, the module is a
Bluetooth Qualified Design by the Bluetooth Special Interest Group (Bluetooth SIG). TI Customers that
build products based on the TI CC2564MODx module can save in testing cost and time per product
family.
For more information, see the CC256x Regulatory Compliance wiki and the CC256x Bluetooth SIG
Certification wiki.
7.1.1 FCC Certification
The TI CC2564MODx module is certified for the FCC as a single-modular transmitter. The module is a
FCC-certified radio module that carries a modular grant. The module complies with the intentional radiator
portion (Part 15c) of the FCC certification: Part 15.247 transmitter tests. For more information, see
CC2564MODx Modular Grant, FCC ID: Z64-2564N. A Class 2 Permissive Change is applied to
CC2564MODA.
7.1.2 IC Certification
The TI CC2564MODx module is certified for the IC as a single-modular transmitter. The TI CC2564MODx
module meets IC modular approval and labeling requirements. The IC follows the same testing and rules
as the FCC regarding certified modules in authorized equipment. For more information, see
CC2564MODx Modular Grant, IC ID: 451I-2564N. A Class 2 Permissive Change is applied to
CC2564MODA.
7.1.3 ETSI/CE Certification
The TI CC2564MODx module is CE certified with certifications to the appropriate EU radio and EMC
directives summarized in the Declaration of Conformity and evidenced by the CE mark. The module is
tested against the ETSI EN300-328 v1.8.1 radio tests, which is accepted by a number of countries for
radio compliance. For more information, see CC2564MODN DoC and CC2564MODA DoC.
7.1.4 Bluetooth Special Interest Group Qualification
The TI CC2564MODx module is Bluetooth qualified and carries a Bluetooth 4.1 Controller Subsystem
Qualification Design ID (QDID), which covers the lower layers of a Bluetooth design up to the HCI layer. TI
customers that build products based on the TI CC2564MODx module can reference this QDID in their
Bluetooth product Listing. For more information, see CC2564MODN Controller Subsystem, QDID 55257
and CC2564MODA Controller Subsystem, QDID 64631.
7.2 Device Support
7.2.1 Development Support
The following products support development of the CC2564MODx module:
• TI Bluetooth Stack
• CC256x Bluetooth Hardware Evaluation Tool
Copyright © 2014–2015, Texas Instruments Incorporated
Device and Documentation Support
41
Submit Documentation Feedback
Product Folder Links: CC2564MODN CC2564MODA