DS92LV1021_14 Datasheet, PDF (4/23 Pages) Texas Instruments – 16-40 MHz 10 Bit Bus LVDS Serializer and Deserializer

DS92LV1021, DS92LV1210
SNLS024C – MARCH 1999 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
CMOS/TTL Input Voltage
CMOS/TTL Output Voltage
Bus LVDS Receiver Input Voltage
Bus LVDS Driver Output Voltage
Bus LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature
Lead Temperature
(Soldering, 4 seconds)
Maximum Package Power Dissipation Capacity
@ 25°C Package:
28L SSOP
Package Derating:
28L SSOP
ESD Rating (HBM)
−0.3V to +4V
−0.3V to (V_CC +0.3V)
−0.3V to (V_CC +0.3V)
−0.3V to +3.9V
−0.3V to +3.9V
Continuous
+150°C
−65°C to +150°C
+260°C
1.27 W
10.2 mW/°C above +25°C
>5kV
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be verified. They are not meant to imply
that the devices should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
Receiver Input Range
Supply Noise Voltage (V_CC)
Min
Nom
Max
Units
3.0
3.3
3.6
V
−40
+25
+85
°C
0
2.4
V
100 mV_P-P
Electrical Characteristics⁽¹⁾
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min Typ⁽²⁾ Max Units
SERIALIZER CMOS/TTL DC SPECIFICATIONS (apply to DIN0-9, TCLK, PWRDN, TCLK_R/F, SYNC1, SYNC2, DEN)
V_IH
High Level Input Voltage
2.0
V_CC
V
V_IL
Low Level Input Voltage
GND
0.8
V
V_CL
Input Clamp Voltage
I_CL = −18 mA
−1.5
V
I_IN
Input Current
V_IN = 0V or 3.6V
−10
±2
+10
μA
DESERIALIZER CMOS/TTL DC SPECIFICATIONS (apply to pins PWRDN, RCLK_R/ F, REN, REFCLK = inputs; apply to pins ROUT,
RCLK, LOCK = outputs)
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_CL
Input Clamp Voltage
I_IN
Input Current
V_OH
High Level Output Voltage
V_OL
Low Level Output Voltage
I_OS
Output Short Circuit Current
I_CL = −18 mA
V_IN = 0V or 3.6V
I_OH = −9 mA
I_OL = 9 mA
VOUT = 0V
2.0
GND
V_CC
V
0.8
V
−0.62 −1.5
V
−10
±1
+10
μA
2.1
2.93
V_CC
V
GND 0.33
0.6
V
−15
−38
−85
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
except VOD, ΔVOD, VTH and VTL which are differential voltages.
(2) Typical values are given for V_CC = 3.3V and T_A = +25°C.
4
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: DS92LV1021 DS92LV1210