|
LM3S1636_13 Datasheet, PDF (38/655 Pages) Texas Instruments – Stellaris Microcontroller | |||
|
◁ |
OBSOLENTREN:DT:I Nhaost rdeicsocomnmtiennudeeddpfroordnuecwtiodneosifgtnhsis. device.
Architectural Overview
â I2C
â Two I2C modules, each with the following features:
â Devices on the I2C bus can be designated as either a master or a slave
⢠Supports both sending and receiving data as either a master or a slave
⢠Supports simultaneous master and slave operation
â Four I2C modes
⢠Master transmit
⢠Master receive
⢠Slave transmit
⢠Slave receive
â Two transmission speeds: Standard (100 Kbps) and Fast (400 Kbps)
â Master and slave interrupt generation
⢠Master generates interrupts when a transmit or receive operation completes (or aborts
due to an error)
⢠Slave generates interrupts when data has been sent or requested by a master
â Master with arbitration and clock synchronization, multimaster support, and 7-bit addressing
mode
â Analog Comparators
â Two independent integrated analog comparators
â Configurable for output to drive an output pin, generate an interrupt, or initiate an ADC sample
sequence
â Compare external pin input to external pin input or to internal programmable voltage reference
â Compare a test voltage against any one of these voltages
⢠An individual external reference voltage
⢠A shared single external reference voltage
⢠A shared internal reference voltage
â PWM
â Three PWM generator blocks, each with one 16-bit counter, two PWM comparators, a PWM
signal generator, a dead-band generator, and an interrupt/ADC-trigger selector
â One fault input in hardware to promote low-latency shutdown
38
July 24, 2012
Texas Instruments-Production Data
|
▷ |