English
Language : 

TCA8418E_15 Datasheet, PDF (3/50 Pages) Texas Instruments – I2C Controlled Keypad Scan IC With Integrated ESD Protection
www.ti.com
5 Pin Configuration and Functions
TCA8418E
SCPS222C – MAY 2010 – REVISED OCTOBER 2015
E
INT
D
SCL
C
SDA
B
VCC
A
RESET
5
PIN
NO.
NAME
A1
ROW7
A2
ROW2
A3
COL1
A4
COL6
A5
RESET
B1
ROW6
B2
CAD_INT
B3
COL2
B4
COL7
B5
VCC
C1
ROW5
C2
ROW1
C3
COL3
C4
COL8
C5
SDA
D1
ROW4
D2
ROW0
D3
COL4
D4
COL9
D5
SCL
E1
ROW3
E2
COL0
E3
COL5
YFP Package
25-Pin DSBGA
Laser Marking and Bump Views
E
E
D
D
C
C
B
B
A
54 3 2 1
A
12 3 4 5
GND
COL9
COL8
COL7
COL6
4
Pin Assignments
COL5
COL4
COL3
COL2
COL1
3
COL0
ROW0
ROW1
CAD_INT
ROW2
2
ROW3
ROW4
ROW5
ROW6
ROW7
1
Pin Functions
I/O
DESCRIPTION
I/O
GPIO or row 7 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or row 2 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 1 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 6 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I
Active-low reset input. Connect to VCC through a pullup resistor, if no active connection is
used.
I/O
GPIO or row 6 in keypad matrix
O
Active-low interrupt hardware output for 3-key simultaneous press-event. Open drain
structure. Connect to VCC through a pullup resistor.
I/O
GPIO or column 2 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 7 in keypad matrix. If unused, connect to VCC through a pullup resistor.
-
Supply voltage of 1.65 V to 3.6 V
I/O
GPIO or row 5 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or row 1 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 3 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 8 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
Serial data bus. Connect to VCC through a pullup resistor.
I/O
GPIO or row 4 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or row 0 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 4 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 9 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I
Serial clock bus. Connect to VCC through a pullup resistor.
I/O
GPIO or row 3 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 0 in keypad matrix. If unused, connect to VCC through a pullup resistor.
I/O
GPIO or column 5 in keypad matrix. If unused, connect to VCC through a pullup resistor.
Copyright © 2010–2015, Texas Instruments Incorporated
Product Folder Links: TCA8418E
Submit Documentation Feedback
3