DS90C387R_15 Datasheet, PDF (3/32 Pages) Texas Instruments – Dual 12-Bit Double Pumped Input LDI Transmitter - VGA/UXGA

DS90C387R
www.ti.com
SNLS062G – NOVEMBER 2000 – REVISED JANUARY 2014
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
LVCMOS/LVTTL Output Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature
Lead Temperature (Soldering, 4 seconds)
Maximum Package Power Dissipation Capacity at 25°C
Package Derating
ESD Rating
100 TQFP Package
HBM, 1.5kΩ, 100pF
EIAJ, 0Ω, 200pF
Min
Max
Unit
−0.3
+4
V
−0.3
V_CC + 0.3
V
−0.3
V_CC + 0.3
Continuous
+150
°C
−65
+150
°C
+260
°C
2.8
W
18.2mW/°C above +25°C
>2
kV
> 300
V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to
imply that the device should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions
All Supply Voltage
Operating Free Air Temperature (T_A)
Supply Noise Voltage (V_CC) up to 33MHz
Min
Nom
Max
Unit
3.0
3.3
3.6
V
−10
+25
+70
°C
100
mV_p-p
Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified.⁽¹⁾
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
LVCMOS/LVTTL DC SPECIFICATIONS ( All pins, except output pins AnP, AnM, CLKnP and CLKnM, BAL, PD pins)
V_IH
High Level Input Voltage
V_REF = V_CC3V = V_CC
V_IL
Low Level Input Voltage
V_REF = V_CC3V = V_CC
V_CL
Input Clamp Voltage
I_CL = 18 mA
I_IN
Input Current
V_IN = 0.4V, or V_CC
V_IN = GND
V_OL
Low level Open Drain Output
I_OL = 2 mA
Voltage
2.0
GND
V_CC
V
0.8
V
-0.8
-1.5
V
+1.8
+15
µA
−15
0
µA
0.1
0.3
V
LVCMOS DC SPECIFICATIONS ( PD pin)
V_IH
High Level Input Voltage
V_REF = V_CC3V = V_CC
2.9
V_CC
V
V_IL
Low Level Input Voltage
V_REF = V_CC3V = V_CC
GND
0.8
V
V_CL
Input Clamp Voltage
I_CL = 18 mA
-0.8
-1.5
V
I_IN
Input Current
V_IN = 0.4V, or V_CC
+1.8
+15
µA
V_IN = GND
−15
0
µA
LVDS DRIVER DC SPECIFICATIONS (output pins AnP, AnM, CLKnP and CLKnM)
V_OD
ΔV_OD
Differential Output Voltage
Change in V_OD between
Complimentary Output States
R_L = 100Ω
247
345
550
mV
35
mV
V_OS
ΔV_OS
Offset Voltage
Change in V_OS between
Complimentary Output States
1.125
1.25
1.475
V
35
mV
I_OS
Output Short Circuit Current
V_OUT = 0V, R_L = 100Ω
I_OZ
Output TRI-STATE Current
PD = 0V, V_OUT = 0V or V_CC
−3.5
−11
mA
±1
±10
µA
(1) Typical values are given for V_CC = 3.3V and T _A = +25°C. Device tested in Non-Balanced mode only.
Copyright © 2000–2014, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90C387R