CC2640R2F Datasheet, PDF (24/64 Pages) Texas Instruments – SimpleLink Bluetooth low energy Wireless MCU

CC2640R2F
SWRS204 – DECEMBER 2016
www.ti.com
ADC Characteristics (continued)
T_c = 25°C, V_DDS = 3.0 V and voltage scaling enabled, unless otherwise noted.⁽¹⁾
PARAMETER
TEST CONDITIONS
Conversion time
Serial conversion, time-to-output, 24-MHz clock
Current consumption
Current consumption
Reference voltage
Reference voltage
Reference voltage
Reference voltage
Input impedance
Internal 4.3-V equivalent reference⁽²⁾
VDDS as reference
Equivalent fixed internal reference (input voltage scaling
enabled). For best accuracy, the ADC conversion should
be initiated through the TIRTOS API in order to include the
gain/offset compensation factors stored in FCFG1.
Fixed internal reference (input voltage scaling disabled).
For best accuracy, the ADC conversion should be initiated
through the TIRTOS API in order to include the gain/offset
compensation factors stored in FCFG1. This value is
derived from the scaled value (4.3 V) as follows:
Vref = 4.3 V × 1408 / 4095
VDDS as reference (Also known as RELATIVE) (input
voltage scaling enabled)
VDDS as reference (Also known as RELATIVE) (input
voltage scaling disabled)
200 ksps, voltage scaling enabled. Capacitive input, Input
impedance depends on sampling frequency and sampling
time
(5) Applied voltage must be within absolute maximum ratings (Section 5.1) at all times.
MIN
TYP
50
0.66
0.75
4.3 ^{(2) (5)}
1.48
VDDS
VDDS /
2.82 ⁽⁵⁾
>1
MAX
UNIT
clock-
cycles
mA
mA
V
V
V
V
MΩ
5.19 Temperature Sensor
Measured on the TI CC2650EM-5XD reference design with T_c = 25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX
Resolution
4
Range
–40
85
Accuracy
±5
Supply voltage coefficient⁽¹⁾
3.2
(1) Automatically compensated when using supplied driver libraries.
UNIT
°C
°C
°C
°C/V
5.20 Battery Monitor
Measured on the TI CC2650EM-5XD reference design with T_c = 25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX
Resolution
50
Range
1.8
3.8
Accuracy
13
UNIT
mV
V
mV
5.21 Continuous Time Comparator
T_c = 25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
Input voltage range
External reference voltage
Internal reference voltage
DCOUPL as reference
Offset
Hysteresis
Decision time
Current consumption when enabled⁽¹⁾
Step from –10 mV to 10 mV
(1) Additionally, the bias module must be enabled when running in standby mode.
MIN TYP MAX
0
VDDS
0
VDDS
1.27
3
<2
0.72
8.6
UNIT
V
V
V
mV
mV
µs
µA
24
Specifications
Submit Documentation Feedback
Product Folder Links: CC2640R2F
Copyright © 2016, Texas Instruments Incorporated