CC2640R2F Datasheet, PDF (15/64 Pages) Texas Instruments – SimpleLink Bluetooth low energy Wireless MCU

www.ti.com
CC2640R2F
SWRS204 – DECEMBER 2016
5 Specifications
5.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾
MIN
MAX UNIT
Supply voltage (VDDS, VDDS2,
and VDDS3)
VDDR supplied by internal DC-DC regulator or
internal GLDO. VDDS_DCDC connected to VDDS on
PCB.
–0.3
Supply voltage (VDDS⁽³⁾ and
VDDR)
External regulator mode (VDDS and VDDR pins
connected on PCB)
–0.3
Voltage on any digital pin⁽⁴⁾⁽⁵⁾
–0.3
4.1 V
2.25 V
VDDSx + 0.3, max 4.1 V
Voltage on crystal oscillator pins, X32K_Q1, X32K_Q2, X24M_N and X24M_P
–0.3
VDDR + 0.3, max 2.25 V
Voltage scaling enabled
–0.3
VDDS
Voltage on ADC input (V_in)
Voltage scaling disabled, internal reference
–0.3
Voltage scaling disabled, VDDS as reference
–0.3
1.49 V
VDDS / 2.9
Input RF level
5 dBm
T_stg
Storage temperature
–40
150 °C
(1) All voltage values are with respect to ground, unless otherwise noted.
(2) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(3) In external regulator mode, VDDS2 and VDDS3 must be at the same potential as VDDS.
(4) Including analog-capable DIO.
(5) Each pin is referenced to a specific VDDSx (VDDS, VDDS2 or VDDS3). For a pin-to-VDDS mapping table, see Table 6-3.
5.2 ESD Ratings
V_ESD
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC
JS001 ⁽¹⁾
Charged device model (CDM), per JESD22-C101⁽²⁾
All pins
RF pins
Non-RF pins
VALUE
±2500
±750
±750
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
5.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
Ambient temperature
Operating supply
voltage (VDDS and
VDDR), external
regulator mode
Operating supply
voltage VDDS
Operating supply
voltages VDDS2 and
VDDS3
Operating supply
voltages VDDS2 and
VDDS3
For operation in 1.8-V systems
(VDDS and VDDR pins connected on PCB, internal DC-DC cannot be used)
For operation in battery-powered and 3.3-V systems
VDDS < 2.7 V
(internal DC-DC can be used to minimize power consumption)
VDDS ≥ 2.7 V
MIN
MAX UNIT
–40
85 °C
1.7
1.95 V
1.8
3.8 V
1.8
3.8 V
1.9
3.8 V
Copyright © 2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC2640R2F
Specifications
15